Chapter 3 Wizard Setup for Internet/Wireless Access
P-660HWP-Dx User’s Guide 47
Figure 36 Manually assign a WEP key
The following table describes the labels in this screen.
5Click Apply to save your wireless LAN settings.
Figure 37 Wireless LAN Setup 3
6Use the read-only summary table to check whether what you have configured is correct.
Click Finish to complete and save the wizard setup.
Table 16 Manually assign a WEP key
LABEL DESCRIPTION
Key The WEP keys are used to encrypt data. Both the P-660HWP-Dx and the wireless
stations must use the same WEP key for data transmission.
Enter any 5, 13 or 29 English keyboard characters or 10, 26 or 58 hexadecimal
characters ("0-9", "A-F") for a 64-bit, 128-bit or 256-bit WEP key respectively.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.