Chapter 17 Remote Management Configuration
P-660HWP-Dx User’s Guide 39
Figure 139 Remote Management: FTP
The following table describes the labels in this screen.
17.6 SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your P-660HWP-Dx supports SNMP agent functionality, which allows a
manager station to manage and monitor the P-660HWP-Dx through the network. The P-
660HWP-Dx supports SNMP version one (SNMPv1) and version two (SNMPv2). The next
figure illustrates an SNMP management operation.
"SNMP is only available if TCP/IP is configured.
Table 100 Remote Management: FTP
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Access Status Select the interface(s) through which a computer may access the P-660HWP-Dx
using this service.
Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the P-
660HWP-Dx using this service.
Select All to allow any computer to access the P-660HWP-Dx using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the P-660HWP-Dx using this service.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to begin configuring this screen afresh.