|
| |
| Table 73 SMT: System Configuration (continued) | |
|
|
|
| FIELD | DESCRIPTION |
|
|
|
| Web Server Port | Specify the port number of the embedded web server on the VSG to access the |
|
| web configurator. The default port number is 80. |
|
| Enter a number between 8010 and 8060 to access the web configurator behind a |
|
| |
|
| If you enter a number between 8010 and 8060, you need to append the port |
|
| number to the WAN or LAN port IP address to access the web configurator. For |
|
| example, if you enter “8010” as the web server port number, then you must enter |
|
| “http://www.192.168.1.1:8010” where 192.168.1.1 is the WAN or LAN port IP |
|
| address. |
| Enter the IP address or domain name of the | |
| Redirect | forwards |
|
| firewall or on a |
At the “S)ave and return R)eturn without saving M)odify:” prompt, type S and press [ENTER] to save the changes and return to the previous screen, type R and press [ENTER] to discard all changes and return to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the device when prompted
Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All changes will be discarded.
32.6 WAN Configuration
From the main menu, type 1 and press [ENTER] to display the System Configuration menu. The WAN Configuration menu varies depending on the selection in the WAN Type field.
Refer to Chapter 6 on page 60 for background information.
32.6.1 WAN Type: Static/DynamicYou can set the VSG to use a static (fixed) or dynamic IP address.
Figure 166 SMT: WAN Configuration: Static/Dynamic
WAN Type? (D/S/P/T) | WAN Configuration |
:S | |
IP Address | :192.168.1.1 |
Subnet Mask | :255.255.255.0 |
Gateway | :192.168.1.254 |
Primary DNS Server | :168.95.1.1 |
Secondary DNS Server | : |
|
|
Chapter 32 Using The SMT | 218 |