Table 3 System Tools: System Account (continued)
LABEL | DESCRIPTION |
|
|
Confirm | Enter the new administrator password again for confirmation. |
|
|
Supervisor Account | This account allows you to view device status only. |
|
|
Username | Enter the user name for the supervisor account. The default is supervisor |
|
|
Password | Enter a new supervisor password. The default is supervisor. |
|
|
Confirm | Enter the new administrator password again for confirmation. |
|
|
Super Subscriber | Once you have configured the Internet connection settings on the VSG, you |
Account | can use this account to test the Internet connection through the VSG. |
Super Subscriber | Select Enable to activate this account. |
| Select Disable to deactivate this account. |
|
|
Idle Timeout | By default, the VSG automatically logs out a super subscriber after five minutes |
| of inactivity. |
| Enter a number (1 to 1440) to set the VSG to log out the super subscriber after |
| the specified inactivity timeout (in minutes). |
Username | Enter the user name for the account manager account. The default is super. |
|
|
Password | Enter a new account manager password. The default is super. |
|
|
Confirm | Enter the new administrator password again for confirmation. |
|
|
Apply | Click Apply to save the changes back to the VSG. |
|
|
3.7 Resetting the VSG
You can restore the device to the factory defaults in one of the following ways.
•The RESET button on the front panel of the VSG (press this button once). Use this method for cases when the username and password of the VSG is not known (refer to Section 2.2.1.5 on page 40).
•The web configurator (refer to Section 3.7 on page 47).
•The SMT (refer to Section 29.4 on page 200).
3.8Restarting the VSG
Note: You must restart the VSG every time you change the system IP address or upload a firmware or configuration file.
All unsaved changes will be lost once you restart the VSG.
In the Main Menu screen, click System Tools, Restart and click Apply.47 | Chapter 3 The Web Configurator |