VSG-1200 V2 User’s Guide

Figure 39 System Setting: Billing: PMS Configuration

The following table describes the labels in this screen.

Table 21 System Setting: Billing: PMS Configuration

LABEL

DESCRIPTION

 

 

Charge Mode (only

When you set up Port-Location Mapping, your VSG offers two billing modes:

for Port-Location

Based on Room and Based on Subscriber.

Mapping enabled)

Select Based on Room when location is important. If a subscriber disconnects

 

from one location and reconnects in another location, the VSG prompts for the

 

user name and password again.

 

Select Based on Subscriber to allow a subscriber to freely move between

 

different locations without prompting for user name and password.

 

Note: You must activate the port-location mapping feature. Refer

 

to Chapter 13 on page 112.

Regenerate

This feature is applicable when you select Scenario B with Built-in

password of static

Authentication in the Authentication screen (see Figure 32 on page 83).

account with PMS

Select Enable to automatically generate a new password for the static account

checkout.

when a subscriber checks out.

 

 

Select Disable to keep the password for the static account unchanged after a

 

subscriber checks out.

PMS Type

Select a PMS system and specify the fields below (if available). Currently the

 

VSG supports Micros Fidelio, Spectrum MK II, Marriott and Proprietary.

Micros Fidelio

 

 

 

Revenue Code

Enter a revenue code (between 01 and 99).

 

 

Description

Enter the description for the revenue. Refer to the user’s guide that comes with

 

your PMS device.

Chapter 10 Billing

92