VSG-1200 V2 User’s Guide

Table 77 SMT: LAN Configuration (continued)

FIELD

DESCRIPTION

 

 

Relay Server IP

This field is only visible when you enter R in the DHCP Service field.

Address

If the VSG is set to function as a DHCP relay, enter the IP address of the DHCP

 

server.

Primary/

These fields are visible when you enter S in the DHCP Service field.

Secondary DNS IP

Enter the IP address of the DNS server(s) in the Primary DNS IP Address and/or

Address

Secondary DNS IP Address fields.

 

 

You must specify a DNS server.

 

 

At the “S)ave and return R)eturn without saving M)odify:” prompt, type S and press [ENTER] to save the changes and return to the previous screen, type R and press [ENTER] to discard all changes and return to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the device when prompted

Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All changes will be discarded.

32.8 System Status

From the main menu, enter 4 and press [ENTER] to display the System Status menu as shown next.

Figure 170 SMT: System Status

System Name

System Status

:

Doamin Name

:

Console Port Speed

:9600

Web Server Port

:80

E-Mail Server Redirect

:

WAN Configuration

:DHCP Client

WAN Type? (D/S/P/T)

IP Address

:172.21.3.66

Subnet Mask

:255.255.0.0

Gateway

:172.21.0.254

Primary DNS Server

:172.20.0.63

Secondary DNS Server

:172.20.0.27

DHCP Configuration

:Disable

DHCP Service? (D/R/S)

Press any key to return.

The following table describes the fields in this screen.

Table 78 SMT: System Status

FIELD

DESCRIPTION

 

 

System Name

This field displays the name of the VSG for identification purposes.

 

 

Domain Name

This field displays the domain name.

 

 

223

Chapter 32 Using The SMT