VSG-1200 V2 User’s Guide

In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen. To return to the Main Menu screen, press 3.

Figure 171 SMT: Utilities Menu

Utilities Menu

1)Firmware Upgrade 2)Change Password 3)Return to Main Menu

Enter selection:

Enter a numeric between 1 and 3.

32.9.1 Firmware Upgrade

Note: You MUST run a TFTP server on a computer where a firmware file is stored to upgrade the firmware on the VSG.

You MUST have a WAN/LAN connection between the VSG and the TFTP server computer at the same time.

Follow the steps below to configure the TFTP settings in the SMT.

1Connect the computer directly to the VSG through the console port. Refer to the section on establishing a console port connection for more information.

2In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen.

3Type 1 and press [ENTER] to display the Firmware Upgrade screen.

4Enter the IP address of the computer running the TFTP server in the TFTP Server IP Address field.

5Specify the name of the firmware file in the Download Filename field.

Figure 172 SMT: Firmware Upgrade

Firmware Upgrade

TFTP Server IP Address

:172.21.4.72

Download Filename

:vsg1200v105.bin

E)xecute Download

R)eturn to Main Menu M)odify

Enter Selection:

 

Enter the command key and press enter.

225

Chapter 32 Using The SMT