ZyXEL Communications zyxel 10.5 Wireless Security Screen

Chapter 10 Wireless LAN

Table 29 Network > Wireless LAN > General

LABEL	DESCRIPTION
Enable	A Basic Service Set (BSS) exists when all communications between
Intra-BSS	wireless clients or between a wireless client and a wired network client go
Traffic	through one access point (AP).
	through one access point (AP).
	Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-
	BSS is enabled, wireless clients can access the wired network and
	communicate with each other. When Intra-BSS is disabled, wireless clients
	can still access the wired network but cannot communicate with each
	other.

Channel	Set the operating frequency/channel depending on your particular region.
Selection	Select a channel from the drop-down list box. The options vary depending

	on the frequency band and the country you are in.
	This option is only available if Auto Channel Selection is disabled.

Auto	Select the check box to have the WAP3205 automatically scan for and
Channel	select a channel which is not used by another device.
Selection

Operating	This displays the channel the WAP3205 is currently using.
Channel

Apply	Click Apply to save your changes back to the WAP3205.

Cancel	Click Cancel to reload the previous configuration for this screen.

Use this screen to select the wireless security mode for each SSID. Click Network

>Wireless LAN > Security to open the Security screen. The screen varies depending on what you select in the Security Mode field.

10.5.1No Security

Select No Security to allow wireless clients to communicate with the access points without any data encryption.