ZyXEL Communications zyxel 11.4 LAN IP Screen

Chapter 11 LAN

Use this screen to change the IP address for your WAP3205. Click Network > LAN > IP.

Figure 72 Network > LAN > IP

The following table describes the labels in this screen.

Table 40 Network > LAN > IP

LABEL	DESCRIPTION
Get from DHCP	Click this to deploy the WAP3205 as a DHCP client in the network.
Server	When you enable this, the WAP3205 gets its IP address from the

	network’s DHCP server (for example, your ISP or router). Users
	connected to the WAP3205 can now access the network (i.e., the
	Internet if the IP address is given by the ISP or a router with Internet
	access).
	The Web Configurator may no longer be accessible unless you know
	the IP address assigned by the DHCP server to the WAP3205.
	Otherwise, you need to reset the WAP3205 to be able to access the
	Web Configurator again (see Section 12.7 on page 127 for details on
	how to reset the WAP3205).
	Also when you select this, you cannot enter an IP address for your
	WAP3205 in the field below.

Use Defined LAN	Click this if you want to specify the IP address of your WAP3205. Or if
IP Address	your ISP or network administrator gave you a static IP address to
	access the network or the Internet.

IP Address	Type the IP address in dotted decimal notation. The default setting is
	192.168.1.2. If you change the IP address you will have to log in again
	with the new IP address.

IP Subnet Mask	The subnet mask specifies the network number portion of an IP
	address.

Gateway IP	Enter a gateway IP address (if your ISP or network administrator gave
Address	you one) in this field.