ZyXEL Communications zyxel 12.3 General Screen, 12.4 Password Screen

Chapter 12 Maintenance

Use this screen to set the management session timeout period. Click

Maintenance > General. The following screen displays.

Figure 74 Maintenance > General

The following table describes the labels in this screen.

Table 42 Maintenance > General

LABEL	DESCRIPTION
Administrator	Type how many minutes a management session can be left idle before
Inactivity Timer	the session times out. The default is 5 minutes. After it times out you
	have to log in with your password again. Very long idle timeouts may
	have security risks. A value of "0" means a management session never
	times out, no matter how long it has been left idle (not
	recommended).

Apply	Click Apply to save your changes back to the WAP3205.

Reset	Click Reset to begin configuring this screen afresh.

It is strongly recommended that you change your WAP3205's password.

If you forget your WAP3205's password (or IP address), you will need to reset the device. See Section 12.8 on page 129 for details

Click Maintenance > Password.

Figure 75 Maintenance > Password