Chapter 10 Wireless LAN
Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on the WAP3205.
Figure 66 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 36 Network > Wireless LAN > WPS
LABEL | DESCRIPTION |
WPS Setup |
|
|
|
Enable WPS | Select this to enable the WPS feature. |
|
|
PIN Number | This displays a PIN number last time system generated. Click Generate |
| to generate a new PIN number. |
|
|
Status |
|
|
|
Status | This displays Configured when the WAP3205 has connected to a |
| wireless network using WPS or when Enable WPS is selected and |
| wireless or wireless security settings have been changed. The current |
| wireless and wireless security settings also appear in the screen. |
| This displays Unconfigured if WPS is disabled and there are no |
| wireless or wireless security changes on the WAP3205 or you click |
| Release_Configuration to remove the configured wireless and |
| wireless security settings. |
|
|
Release | This button is only available when the WPS status displays Configured. |
Configuration | Click this button to remove all configured wireless and wireless security |
| |
| settings for WPS connections on the WAP3205. |
|
|
802.11 Mode | This is the 802.11 mode used. Only compliant WLAN devices can |
| associate with the WAP3205. |
|
|
SSID | This is the name of the wireless network (the WAP3205’s first SSID). |
|
|
Security | This is the type of wireless security employed by the network. |
|
|
Apply | Click Apply to save your changes back to the WAP3205. |
|
|
Cancel | Click Cancel to reload the previous configuration for this screen. |
|
|
112 |
| |
WAP3205 User’s Guide |
| |
|
|
|