Chapter 10 Wireless LAN
The following table describes the labels in this screen.
Table 34 Network > Wireless LAN > Advanced
LABEL | DESCRIPTION |
RTS/CTS | Data with its frame size larger than this value will perform the RTS |
Threshold | (Request To Send)/CTS (Clear To Send) handshake. |
| Enter a value between 256 and 2432. |
|
|
Fragmentatio | The threshold (number of bytes) for the fragmentation boundary for |
n Threshold | directed messages. It is the maximum data fragment size that can be |
| sent. Enter an even number between 256 and 2346. |
|
|
Output Power | Set the output power of the WAP3205 in this field. If there is a high |
| density of APs in an area, decrease the output power of the WAP3205 to |
| reduce interference with other APs. Select one of the following 100%, |
| 90%, 75%, 50%, 25% or 10%. See the product specifications for |
| more information on your WAP3205’s output power. |
|
|
Network | Select 11b only to allow only IEEE 802.11b compliant WLAN devices to |
Mode | associate with the WAP3205. |
| Select 11g only to allow only IEEE 802.11g compliant WLAN devices to |
| associate with the WAP3205. |
| Select 11 b/g mixed mode to allow both IEEE802.11b and IEEE802.11g |
| compliant WLAN devices to associate with the WAP3205. The transmission |
| rate of your WAP3205 might be reduced. |
Select 11 b/g/n mixed mode to allow both IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN devices to associate with the WAP3205. The transmission rate of your WAP3205 might be reduced.
HT (High Throughput) Physical Mode - Use the fields below to configure the 802.11 wireless environment of your WAP3205.
Operating | Choose this according to the wireless mode(s) used in your network. |
Mode | Mixed - Select this if the wireless clients in your network use different |
| |
| wireless modes (for example, IEEE 802.11b/g and IEEE 802.1n modes) |
| Green - Select this if the wireless clients in your network uses only one |
| type of wireless mode (for example, IEEEE 802.11 n only) |
|
|
Channel | Select the channel bandwidth you want to use for your wireless network. |
Bandwidth | It is recommended that you select 20/40 MHz. |
| |
| Select 20 MHz if you want to lessen radio interference with other wireless |
| devices in your neighborhood. |
|
|
Guard | Select Auto to increase data throughput. However, this may make data |
Interval | transfer more prone to errors. |
| Select Long to prioritize data integrity. This may be because your wireless |
| network is busy and congested or the WAP3205 is located in an |
| environment prone to radio interference. |
|
|
Extension | This is set to Auto by default. |
Channel | If you select 20/40 MHz as your Channel Bandwidth, the extension |
| |
| channel enables the WAP3205 to get higher data throughput. This also |
| lowers radio interference and traffic. |
|
|
110 |
| |
WAP3205 User’s Guide |
| |
|
|
|