Chapter 12 Maintenance
Click Maintenance > Backup/Restore. Information related to factory defaults, backup configuration, and restoring configuration appears as shown next.
Figure 79 Maintenance > Backup/Restore
The following table describes the labels in this screen.
Table 46 Maintenance > Backup/Restore
LABEL | DESCRIPTION |
Backup | Click Backup to save the WAP3205’s current configuration to your |
| computer. |
|
|
File Path | Type in the location of the file you want to upload in this field or click |
| Browse... to find it. |
|
|
Browse... | Click Browse... to find the file you want to upload. Remember that you |
| must decompress compressed (.ZIP) files before you can upload them. |
|
|
Upload | Click Upload to begin the upload process. |
| Note: Do not turn off the WAP3205 while configuration file upload is in |
| progress. |
| After you see a “configuration upload successful” screen, you must then |
| wait one minute before logging into the WAP3205 again. The WAP3205 |
| automatically restarts in this time causing a temporary network |
| disconnect. |
| If you see an error screen, click Back to return to the Backup/Restore |
| screen. |
|
|
Reset | Pressing the Reset button in this section clears all |
| configuration information and returns the WAP3205 to its factory defaults. |
| You can also press the RESET button on the rear panel to reset the factory |
| defaults of your WAP3205. Refer to the chapter about introducing the Web |
| Configurator for more information on the RESET button. |
128 |
| |
WAP3205 User’s Guide |
| |
|
|
|