13

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories.

•Power, Hardware Connections, and LEDs

•WAP3205 Access and Login

•Internet Access

•Resetting the WAP3205 to Its Factory Defaults

•Wireless Router/AP Troubleshooting

13.1Power, Hardware Connections, and LEDs

The WAP3205 does not turn on. None of the LEDs turn on.

1Make sure you are using the power adaptor or cord included with the WAP3205.

2Make sure the power adaptor or cord is connected to the WAP3205 and plugged in to an appropriate power source. Make sure the power source is turned on.

3Disconnect and re-connect the power adaptor or cord to the WAP3205.

4If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

1Make sure you understand the normal behavior of the LED. See Section 1.5 on page 20.

2Check the hardware connections. See the Quick Start Guide.

 

133

WAP3205 User’s Guide