Chapter 4 Client Mode
The following table describes the labels in this screen.
Table 12 Client Mode: WLAN > WPS
LABEL | DESCRIPTION |
Station Site Survey | |
|
|
# | Use the radio button to select the wireless device to which you want to |
| connect using WPS. |
|
|
SSID | This displays the SSID of the wireless device. |
|
|
BSSID | This displays the MAC address of the wireless device. |
|
|
Signal | This displays the strength of the wireless signal. The signal strength |
Strength | mainly depends on the antenna output power and the distance between |
| your WAP3205 and this device. |
|
|
Ch. | This displays the channel number used by this wireless device. |
|
|
Auth. | This displays the authentication method used by this wireless device. |
|
|
Encrypt | This displays the data encryption method used by this wireless device. |
|
|
Ver. | This displays the firmware version running on the wireless device. |
|
|
Status | This displays Conf. (configured) when WPS has been set up on the |
| wireless device. |
| This displays Unconf. (unconfigured) if WPS has not been set up on the |
| wireless device. |
|
|
PIN | This displays the PIN number of the WAP3205. |
|
|
Renew PIN | Click this button to generate a new PIN and display it in the PIN field. |
|
|
PIN Start | Click this button to perform wireless security information synchronization |
| using the PIN configuration method. |
|
|
PBC Start | Click this button to perform wireless security information synchronization |
| using the Push Button Configuration (PBC) method. |
|
|
Stop | Click this button to cancel wireless security information synchronization. |
|
|
Rescan | Click this button to search for available for |
| transmission range and update this table. |
|
|
44 |
| |
WAP3205 User’s Guide |
| |
|
|
|