Chapter 8 Tutorials

2The default IP address of the WAP3205 is “192.168.1.2”. In this case, your computer must have an IP address in the range between “192.168.1.3” and “192.168.1.254”.

3Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to show your computer’s IP address. If your computer’s IP address is not in the correct range then see Appendix C on page 167 for information on changing your computer’s IP address.

4After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and type “http://192.168.1.2” as the web address in your web browser.

5Enter “1234” (default) as the password and click Login.

6Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.

7The Easy mode appears. Click Expert Mode in the navigation panel.

8Go to Configuration > Network > Wireless LAN > General. Configure the screen as follows. In this example, you select Enable Intra-BSS Traffic for SSID_Worker and SSID_Guest to allow wireless clients in the same wireless network to communicate with each other. Click Apply.

82

 

WAP3205 User’s Guide