ZyXEL Communications zyxel 8.7Connecting the WAP3205 (in Client Mode) to an AP or Wireless Router

Chapter 8 Tutorials

8.7Connecting the WAP3205 (in Client Mode) to an AP or Wireless Router

If you have an access point or wireless router with Internet access deployed in your network already, and you want to use the WAP3205 as a wireless client to connect to the existing AP or wireless router, set the WAP3205 to client mode. The WAP3205 then acts as a wireless client. Your device, such as a computer, can connect to the WAP3205 through a wired connection to access the Internet.

1Connect your computer to the LAN port of the WAP3205 using an Ethernet cable.

2The default IP address of the WAP3205 is “192.168.1.2”. In this case, your computer must have an IP address in the range between “192.168.1.3” and “192.168.1.254”.

3Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to show your computer’s IP address. If your computer’s IP address is not in the correct range then see Appendix C on page 167 for information on changing your computer’s IP address.

4After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and type “http://192.168.1.2” as the web address in your web browser.

5Enter “1234” (default) as the password and click Login.

6Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.

7The Easy mode appears. Click Expert Mode in the navigation panel.

8On the left of the screen, click Maintenance > Sys OP Mode and select Client Mode. Click Apply. The WAP3205 restarts.

9Enter the password and click Login to access the web configurator again. Click Expert Mode.

88
	WAP3205 User’s Guide