ZyXEL Communications zyxel 14.1 Wall-mountingInstructions

Chapter 14 Product Specifications

Table 49 Firmware Features

FEATURE	DESCRIPTION
Device Management	Use the Web Configurator to easily configure the rich range of
	features on the WAP3205.

Wireless Functionality	Allows IEEE 802.11b, IEEE 802.11g and/or IEEE 802.11n
	wireless clients to connect to the WAP3205 wirelessly. Enable
	wireless security (WPA(2)-PSK) and/or MAC filtering to protect
	your wireless network.

	Note: The WAP3205 may be prone to RF (Radio
	Frequency) interference from other 2.4 GHz devices
	such as microwave ovens, wireless phones,
	Bluetooth enabled devices, and other wireless LANs.

Firmware Upgrade	Download new firmware (when available) from the ZyXEL web
	site and use the Web Configurator to put it on the WAP3205.
	Note: Only upload firmware for your specific model!

Configuration Backup & Make a copy of the WAP3205’s configuration and put it back on
Restoration	the WAP3205 later if you decide you want to revert back to an
	earlier configuration.

Wireless LAN Scheduler	You can schedule the times the wireless LAN is enabled/
	disabled.

Time and Date	Get the current time and date from an external server when
	you turn on your WAP3205. You can also set the time manually.
	These dates and times are then used in logs.

IP Multicast	IP Multicast is used to send traffic to a specific group of
	computers. The WAP3205 supports versions 1 and 2 of IGMP
	(Internet Group Management Protocol) used to join multicast
	groups (see RFC 2236).

Logging	Use logs for troubleshooting. You can view logs in the Web
	Configurator.

Complete the following steps to hang your WAP3205 on a wall.

1Select a position free of obstructions on a sturdy wall.

2Drill two holes for the screws.

Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws.

3Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall.