Husqvarna 1153136-49 manuel dutilisation Starting and Stopping, Starting and stopping, Cold engine

Page 21

STARTING AND STOPPING

Starting and stopping

WARNING! Note the following before

!starting:

The chain brake must be engaged when the chain saw is started to reduce the chance of contact with the moving chain during starting.

Never start a chain saw unless the bar, chain and all covers are fitted correctly. Otherwise the clutch can come loose and cause personal injuries.

Place the machine on firm ground. Make sure you have a secure footing and that the chain cannot touch anything.

Keep people and animals well away from the working area.

Never wrap the starter cord around your hand.

Starting

The chain brake should be activated when starting the chain saw. Activate the chain brake by pushing the front hand guard forwards. (49)

Cold engine

Start position, 1: Set the start/stop switch in the choke position by pulling the red control outward - upward. (50) Decompression valve (2): Press the valve to reduce the pressure in the cylinder and make starting easier. Once the machine has started the valve will automatically return to its original setting. (50)

Air purge (3): Press the air purge diaphragm repeatedly until fuel fills the diaphragm (at least 6 times). The diaphragm need not be completely filled. (50)

Grip the front handle with your left hand. Hold the chain saw on the ground by placing your right foot through the rear handle. (51)

Pull the starter handle, 4: Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance (as the starter pawls engage) then pull firmly and rapidly until the engine fires.

Push down the red choke control, 5: As soon as the engine fires which can be heard through a "puff" sound, push down on the red choke control.

Pull the starter handle (6): Keep on pulling the cord powerfully until the engine starts.

Warm engine

Start position, 1: The correct choke/start throttle setting for warm starting is obtained by initially moving the choke control by pulling the red control outward - upwards. (50) Decompression valve (2): Press the valve to reduce the pressure in the cylinder and make starting easier. Once the machine has started the valve will automatically return to its original setting. (50)

Air purge (3): Press the air purge diaphragm repeatedly until fuel fills the diaphragm (at least 6 times). The diaphragm need not be completely filled. (50)

1153136-49 Rev.2 2010-04-08

Push down the red choke control, 5: This inactivates the choke, which is not needed when starting a warm chain saw. However the movement of the start/stop switch will have engaged a high idle, making warm starting easier.

Pull the starter handle, 6: Grip the front handle with your left hand. Hold the chain saw on the ground by placing your right foot through the rear handle. (51)

Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance (as the starter pawls engage) then pull firmly and rapidly until the engine fires.

As the chain brake is still engaged the speed of the engine must be set to idling as soon as possible, this is achieved by disengaging the throttle lock. Disengagement is done by gently touching on the throttle trigger. This prevents unnecessary wear to the clutch, clutch drum and brake band. Allow the machine to idle a few seconds before giving full throttle.

There is a simplified start reminder with illustrations to describe each step on the rear edge of the saw (A). (50) NB! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

Note! Pull the front hand guard towards the front handle.The chain brake is now disengaged. Your saw is ready for use.

WARNING! Long term inhalation of the

! engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.

• Never start a chain saw unless the bar, chain and all covers are fitted correctly. See instructions under the heading Assembly. Without a bar and chain attached to the chain saw the clutch can come loose and cause serious injury.

• The chain brake should be activated when starting. Se instructions under the heading Start and stop. Do not drop start. This method is very dangerous because you may lose control of the saw. (52)

• Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

• Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

• Always hold the saw with both hands. The right hand should be on the rear handle, and the left hand on the front handle. All people, whether right or left handed, should use this grip. Use a firm grip with thumbs and fingers encircling the chain saw handles.

Stopping

Stop the engine by pushing the start/stop switch down. (53) NB! The start/stop switch automatically returns to run position. To avoid involuntary start up, the spark plug cap must always be removed from the spark plug when the machine is unsupervised. (54)

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 1153136-49 Rev.2 445 445e 450 450e1153136-49 Rev.2 3839 4243 1153136-49 Rev.2 102 KEY to Symbols Symbols on the machine and/or in the manualAir purge Adjustment of the oil pump 1153136-49 Rev.2 Canada You will find the following labels on your chain sawContents What is what on the chain saw? IntroductionDear customer Before using a new chain saw General Safety PrecautionsMachine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guard Throttle lockoutChain catcher Cutting equipment Sharpening your chain and adjusting depth gauge setting Lubricating cutting equipment Tensioning the chainChain drive sprocket Checking chain lubricationNeedle bearing lubrication Checking wear on cutting equipmentFitting the bar and chain Assembly445 445e, 450eFuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingStarting StoppingWorking Techniques Basic safety rulesBefore use General working instructionsBasic cutting technique TermsLimbing Tree felling technique How to avoid kickback What is kickback?Freeing a tree that has fallen badly Maintenance Carburetor adjustmentGeneral Muffler StarterReplacing the starter cord Spark plug Air filterLubricating the bar tip sprocket Needle bearing lubricationTemperature -5C 23F or colder Air Injection centrifugal cleaningCooling system Winter useMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceMore even wear. Check Technical data Technical DataSaw chain filing and file gauges Bar and chain combinationsRecommended cutting equipment for Canada 050/1,3 mmYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSafety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautionsSymboles sur la machine et/ou dans le manuel Explication DES SymbolesDécompresseur Le Pompe à carburant Réglage de la pompe à huileEPA Sommaire SommaireConsignes de sécurité pour les utilisateurs de Quels sont les composants de la tronçonneuse? Cher clientInstructions Générales DE Sécurité AVERTISSEMENT! Ne jamais modifierAVERTISSEMENT! Utilisée de manière Équipement de protection personnelle Utilisez toujours votre bon sensFrein de chaîne avec arceau protecteur Équipement de sécurité de la machineCapteur de chaîne Blocage de l’accélérationProtection de la main droite Système anti-vibrationsRègles élémentaires Équipement de coupeÉquipement de coupe anti-rebond Affûtage et réglage de l’épaisseur du copeau de la chaîneGénéralités sur le réglage de l’épaisseur du copeau Tension de la chaîneLibérer le bouton en le dépliant Lubrification de l’équipement de coupeRemplissage d’huile de chaîne Contrôle de la lubrification de la chaîneGraissage du roulement à aiguilles Pignon d’entraînementContrôle de l’usure de l’équipement de coupe AVERTISSEMENT! La plupart desMontage du guide-chaîne et de la chaîne MontageAVERTISSEMENT! Utiliser des gants Pour toute manipulation de la chaîneCarburant Manipulation DU CarburantSécurité carburant Remplissage de carburantTransport et rangement Remisage prolongéDémarrage ET Arrêt Démarrage et arrêtDémarrage Arrêt Avant chaque utilisation Techniques DE TravailMéthodes de travail Règles élémentaires de sécuritéLâcher les poignées Technique de base pour la coupeAVERTISSEMENT! N’utilisez jamais une GénéralitésÉlagage Techniques d’abattageDistance de sécurité Sens d’abattageSolution à un abattage raté Mesures anti-rebond Qu’est-ce qu’un rebond?Tronçonnage en rondins Entretien GénéralitésRéglage du carburateur Remplacement de la corde du lanceur SilencieuxLanceur Bougie Filtre à airMise sous tension du ressort Montage du lanceurGraissage du roulement à aiguilles Graissage du pignon d’entraînement du guideSystème de refroidissement Épuration centrifuge Air InjectionEst en bon état, le remplacer si Schéma d’entretien’embrayage Inspecter tous les câbles etÉquipement de coupe recommandé pour Canada Caractéristiques TechniquesCaractéristiques techniques Affûtage de la chaîne et gabarits d’affûtage Combinaisons guide-chaîne et chaîneVOS Droits ET Obligations EN Garantie Demande D’INDEMNITÉ Service APRÈS-VENTE Autres consignes de sécurité Précautions à prendre pour se protéger des rebondsAnsi B175.1-2000 Annexe C AVERTISSEMENT! N’utilisez pas unePrécautions Sécuritaires Conformant AUX Normes Américaines Aclaracion DE LOS Simbolos Símbolos en la máquina en/o el manual de instruccionesBomba de combustible Ajuste de la bomba de aceite Etiquetas que se encuentran en la motosierra Indice ÍndicePrecauciones de seguridad para usuarios de Introduccion Apreciado cliente¿Qué es qué en la motosierra? Instrucciones Generales DE Seguridad Medidas a tomar antes de utilizar una motosierra nuevaImportante Equipo de seguridad de la máquina Equipo de protección personalFreno de cadena con protección contra reculadas ¡ATENCION! La mayoría de losCaptor de cadena Fiador del aceleradorProtección de la mano derecha Sistema amortiguador de vibracionesBotón de parada Equipo de corteSilenciador Reglas básicasCadena Generalidades sobre el afilado de los dientes cortantesGeneralidades sobre el ajuste de la profundidad de corte Lubricación del equipo de corte Tensado de la cadenaAjuste de la profundidad de corte Repostaje de aceite para cadena de motosierraSi no funciona la lubricación de la cadena Control de la lubricación de la cadenaPiñón de arrastre de la cadena Lubricación del cojinete de agujasMontaje de la espada y la cadena MontajeMontaje del apoyo de corteza ¡ATENCION! Para manipular la cadenaCarburante Manipulacion DEL CombustibleSeguridad en el uso del combustible RepostajeTransporte y almacenamiento Almacenamiento prolongadoArranque y parada Arranque Y ParadaArranque Nunca enrosque el cordón de arranque alrededor de la manoParada Antes de utilizar la máquina Tecnica DE TrabajoInstrucciones generales de trabajo Reglas básicas de seguridadDesignaciones Técnica básica de corteDesramado Técnica de talaDistancia de seguridad Dirección de derriboTratamiento de una tala fallida Medidas preventivas de las reculadas ¿Qué es la reculada?Tronzado del tronco Mantenimiento GeneralidadesAjuste del carburador Silenciador Mecanismo de arranqueCambio del cordón de arranque Filtro de aire BujíaEngrase del cabezal de rueda de la espada Sistema refrigerante Lubricación del cojinete de agujasDepuración centrífuga Air Injection Utilización en inviernoPrograma de mantenimiento Compruebe si están desgastados elLimpie el filtro de aire. Cámbielo si es Datos técnicos Datos TecnicosAfilado y calibres de afilado de la cadena de sierra Combinaciones de espada y cadenaSUS Derechos Y Obligaciones DE Garantia Garantia DEL Sistema DE Control DE EmisionesLista DE Componentes DE LA Garantia DE Control DE Emisiones Precauciones de seguridad para usuarios de motosierras Precauciones DE Seguridad DE LA Norma AmericanaPrecauciones de seguridad en reculadas Otras precauciones de seguridadPrecauciones DE Seguridad DE LA Norma Americana ´z+U-¶2a¨ ´z+U-¶2a¨

1153136-49 specifications

The Husqvarna 1153136-49 is a reliable and high-performance chainsaw specifically designed for homeowners and occasional users who seek both power and ease of use. Its construction reflects Husqvarna's reputation for quality and innovation, making it a preferred choice among enthusiasts and those needing practical tools for yard and garden maintenance.

One of the standout features of the 1153136-49 is its powerful engine. It is equipped with a sturdy and efficient 50.2cc X-Torq engine, which delivers excellent power output while minimizing fuel consumption and emissions. This means users can enjoy extended operation time with reduced environmental impact, which is increasingly important in today’s eco-conscious world.

The chainsaw boasts an impressive cutting length, making it suitable for a variety of tasks, from pruning branches to cutting firewood. With a bar length of 18 inches, it provides the versatility needed for light to medium-duty jobs, enabling users to tackle projects around their homes and gardens with ease.

Husqvarna has designed the 1153136-49 with user comfort and safety in mind. It features an ergonomic handle with a soft grip that reduces vibrations, allowing for longer periods of use without discomfort. The chainsaw also includes an advanced anti-vibration system, ensuring a smoother operation that minimizes strain on the user’s hands and arms.

Safety is paramount when using a chainsaw, and Husqvarna has integrated several key safety features in the 1153136-49. It comes with a chain brake that stops the chain in case of kickback, as well as low kickback chains that further enhance user safety during operation. The quick-release air filter simplifies maintenance and ensures optimal engine performance.

Another innovative feature is the tool-less chain tensioning system, which allows for easy adjustments on the go, ensuring that the chain remains tight and secure during use. This design not only saves time but also enhances overall safety.

In conclusion, the Husqvarna 1153136-49 is a powerful, efficient, and user-friendly chainsaw packed with features that enhance performance and safety. It is an ideal choice for homeowners and anyone looking to manage their outdoor tasks effectively. With a strong engine, ergonomic design, and safety features, it represents a smart investment for maintaining gardens and outdoor spaces.
Top Page Image Contents