Ryobi RY34001 manuel dutilisation Specific Safety Rules for Trimmer USE

Page 6

GENERAL SAFETY RULES

Allow the engine to cool; empty the fuel tank and secure the unit from moving before transporting in a vehicle.

Wear your protective equipment and observe all safety instructions. For units equipped with a clutch, be sure

the cutting attachment stops turning when the engine idles. When the unit is turned off make sure the cutting attachment has stopped before the unit is set down.

SPECIFIC SAFETY RULES

SPECIFIC SAFETY RULES FOR TRIMMER USE

Inspect before use. Replace damaged parts. Make sure fasteners are in place and secure. Check for fuel leaks.

Replace string head if cracked, chipped, or damaged in any way. Be sure the string head or blade is properly installed and securely fastened. Failure to do so can cause serious injury.

Make sure all guards, straps, deflectors, and handles are properly and securely attached.

Use only the manufacturer’s replacement line in the cutting head. Do not use any other cutting attachment. To install any other brand of replacement line or cutting head to this string trimmer can result in serious personal injury. Never use, for example, wire or wire-rope, which can break off and become a dangerous projectile.

Never operate unit without the grass deflector in place and in good condition.

Never use blades, flailing devices, wire, or rope on trimmer attachment.

Maintain a firm grip on both handles while trimming. Keep string head below waist level. Never cut with the string head located over 30 in. or more above the ground.

SPECIFIC SAFETY RULES FOR ­BRUSHCUTTER AND BLADE USE

Brushcutter blades coast after throttle trigger is released or engine is stopped. Keep the rotating blade in thicker weeds or pulpy stalks until the blade completely stops.

Do not operate the brushcutter unless the brushcutter guard is firmly secured in place and in good condition.

Use heavy gloves when operating the brushcutter and when installing or removing blades.

Always stop the engine and remove the spark plug wire before attempting to remove any obstruction caught or jammed in the blade or before removing and installing the blade.

Do not attempt to touch or stop the blade when it is rotating.

A coasting blade can cause injury while it continues to spin after the engine is stopped or throttle trigger released. Maintain proper control until the blade has completely stopped rotating.

Replace any blade that has been damaged. Always make sure blade is installed correctly and securely fastened before each use. Failure to do so can cause serious injury.

Use only the manufacturer’s replacement Tri-Arc®blade intended for use on this brushcutter. Do not use any other blade. To install any other brand blade or cutting head to this brushcutter can result in serious personal injury.

The Tri-Arc®blade is suited for cutting thicker weeds or pulpy stalks only. Do not use for any other purpose. Never use the Tri-Arc®blade to cut woody brush.

Exercise extreme caution when using the blade with this unit. Blade thrust is the reaction that may occur when the spinning blade contacts anything it cannot cut. This contact may cause the blade to stop for an instant, and suddenly “thrust” the unit away from the object that was hit. This reaction can be violent enough to cause the operator to lose control of the unit. Blade thrust can occur without warning if the blade snags, stalls, or binds. This is more likely to occur in areas where it is difficult to see the material being cut. For cutting ease and safety, approach the weeds being cut from the right to the left. In the event an unexpected object or woody stock is encountered, this could minimize the blade thrust reaction.

Never cut any material over 1/2 in. diameter.

Always wear the shoulder harness when using the brushcutter and adjust to a comfortable operating position. Maintain a firm grip on both handles while cutting with a blade. Keep the blade away from your body and below waist level.

Never use the brushcutter with the blade located 30 in. or more above the ground level.

Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

NOTE: ADDITIONAL SPECIFIC SAFETY RULES CAN BE FOUND IN THE APPLICABLE ATTACHMENT’S OPERATOR’S MANUAL

4 — English

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Save this Manual for Future Reference Toutes LES Versions Todas LAS VersionesPage Iii Table of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules Specific Safety Rules for Trimmer USESpecific Safety Rules for ­BRUSHCUTTER and Blade USE Symbols Symbol Signal MeaningSymbol Name Explanation Features AssemblyOperation Removing AN Attachment from the Power HeadFueling and Refueling the Power Head Attaching the Front HandleOxygenated Fuels Operating the Power HeadDo not USE E85 FUEL. IT will Void Your Warranty ADDING/CHECKING Engine LubricantBlade Thrust MaintenanceGeneral Maintenance Starting and StoppingCleaning AIR Filter Screen Cleaning the Exhaust Port and Muffler Spark ArrestorIdle Speed Adjustment Spark Plug ReplacementStoring the Product Adjusting CAMSHAFT-TO-ROCKER ARM ClearanceWhen storing 1 month or longer High Altitude Engine OperationIng Air Filter Screen earlier in this TroubleshootingProblem Possible Cause Solution See Adding/Checking EngineWarranty Limited Warranty StatementMANUFACTURER’S Warranty Coverage This Product WAS Manufactured with a Catalyst Muffler English Règles DE Sécurité Générales AvertissementLire Toutes LES Instructions Règles DE Sécurité Particulières Symboles Symbole NOM ExplicationCaractéristiques AssemblageRetrait ou remplacement de l’accessoire Installation DE LA Poignée AvantRetrait DE L’ACCESSOIRE DU BLOC- Moteur UtilisationCarburants Oxygénés AJOUT/VÉRIFICATION DE LubrifiantUtilisation DU BLOC-MOTEUR Démarrage ET Arrêt EntretienRicochet DE Lame Avertissement AvertissementRéglage DU Ralenti Bouchon DU RéservoirPARE-ÉTINCELLES Changer LE Lubrifiant À MoteurVoir les figures 13 à Remisage LE ProduitFonctionnement DU Moteur À Haute Altitude Remisage 1 mois ou plusDépannage Problème Cause Possible SolutionRemplacement de la bougie plus Section Nettoyage du filtre à airGarantie Énoncé DE LA Garantie LimitéeResponsabilités DU Propriétaire Dans LE Cadre DE LA Garantie ’AIDE? Fonctionnement Chaque annéeReglas DE Seguridad Generales AdvertenciaLEA Todas LAS Instrucciones Reglas DE Seguridad Específicas Símbolos PeligroPrecaución Características ArmadoDesmontaje UN Aditamento DEL Cabezal Motor FuncionamientoMontaje DEL Mango Delantero Para desmontar o cambiar el aditamentoManejo DE EL Cabezal Motor Combustibles OxigenadosAbastecimiento Y Verificación DE Lubricante No USE Combustible E85. Anulará SU GarantíaArranque Y Apagado MantenimientoContragolpe DE LA Cuchilla Mantenimiento GeneralAjuste DE LA Marcha Lenta Limpieza DEL Orificio DE Escape Y DEL SilenciadorParachispas Limpieza DEL Filtro DE Aire PantallaOperación DEL Motor a Altitudes Elevadas Ajuste DE LA Apertura DEL Árbol DE Levas DEL BalancínAlmacenamiento DE LA Producto Vea las figuras 13 aSolución DE Problemas Garantía Declaración DE LA Garantía LimitadaCobertura DE LA Garantía DEL Fabricante Este Producto SE Fabricó CON UN Silenciador Catalítico 4050English Proposition 65 DE L’ÉTAT DE Californie Manuel D’UTILISATION / Manual DEL OperadorCalifornia Proposition California Propuesta DE LEY NÚM

RY34001 specifications

The Ryobi RY34001 is a versatile outdoor power tool designed for homeowners and DIY enthusiasts seeking reliable performance in a handheld leaf blower. This battery-powered leaf blower offers a convenient way to maintain your yard, driveway, and patio, eliminating debris and leaves effortlessly.

One of the standout features of the RY34001 is its powerful 40V lithium-ion battery. This battery technology provides a significant advantage over traditional gas-powered blowers, delivering consistent and potent power without the hassle of gas or oil mixtures. Users can enjoy longer run times, enabling them to complete their yard work without interruptions. Additionally, the battery charge time is relatively quick, allowing users to get back to their tasks without long waits.

The RY34001 is designed with an impressive air volume rating of up to 540 CFM (cubic feet per minute) and an air speed of up to 130 MPH. This combination ensures that it can easily tackle heavy debris and wet leaves, making it perfect for both light clean-up tasks and more demanding jobs. The variable speed trigger allows users to adjust the airflow to suit their specific needs, whether they are moving light grass clippings or dealing with stubborn, wet piles of leaves.

Another notable characteristic of the Ryobi RY34001 is its ergonomic design. The blower features a lightweight construction, making it easy to handle and maneuver during operation. This design is complemented by a comfortable grip, reducing fatigue during extended use. The unit also includes a built-in cord retainer to prevent accidental disconnection, further enhancing user experience.

Ryobi has incorporated their patented technology into the RY34001, ensuring it delivers reliable performance time after time. The unit is also compatible with other Ryobi 40V tools, making it a valuable addition to a growing collection of outdoor equipment. With the RY34001, users can embrace a clean and well-maintained yard with the convenience of battery power, proving that efficiency and performance can go hand in hand. Whether you have a small garden or a larger property, the Ryobi RY34001 leaf blower is an excellent tool for simplifying yard maintenance.
Top Page Image Contents