Remington M12510US, M15012US, M15014US, M15014AS, M30016US, M30016AS, M30016AW, M35016UW, M35016AW

Page 11

OPERATING CHAIN SAW

Continued

CUTTING WITH THE CHAIN SAW

1.Connect saw to extension cord. Connect exten- sion cord to power supply.

2.Make sure section of log to be cut is not laying on ground. This will keep chain from touching ground as it cuts through log. Touching ground with moving chain will dull chain.

3.Use both hands to grip saw. Always use left hand to grip front handle and right hand to grip rear handle. Use firm grip. Thumbs and fingers must wrap around saw handles (see Figure 12).

4.Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet.

5.When ready to make a cut, push the lockout button completely forward with the right thumb and squeeze the trigger (see Figure 12). This will turn saw on. Releasing trigger will turn saw off. Make sure saw is running at full speed before starting a cut.

6.When starting a cut, place moving chain against wood. Hold saw firmly in place to avoid possible bouncing or skating (sideways movement) of saw.

7.Guide saw using light pressure. Do not force saw. The motor will overload and can burn out. It will do the job better and safer at the rate for which it was intended.

8.Remove saw from a cut with saw running at full speed. Stop saw by releasing trigger. Make sure chain has stopped before setting saw down.

9.Practice until you can maintain a steady, even cutting rate.

Switch Lockout Button

Trigger

Figure 12 - Lockout Button and Trigger Location

FELLING A TREE (Cutting Down a Tree)

WARNING:

•Avoidkickback.Kickbackcanresultinse- vereinjuryordeath.SeeKickback,pages 4 and 5, to avoid risk of kickback.

•Do not fell a tree without ample skill or expert help.

•Keep children,animals,and bystanders away from area when felling a tree.

•If two or more persons perform buck- ing and felling operations at the same time, provide ample distance between operations.Provide distance of at least twice the height of tree being felled.

WARNING: When felling a tree, be aware of your surroundings. Do not endanger any person, strike utility lines, or cause property damage.If tree strikes utility lines, contact utility company at once.

Felling is the process of cutting down a tree. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet. Follow directions below to fell a tree.

Before Felling a Tree

1.Before felling, inspect tree. Make sure there are no dead limbs or branches that may fall on you. Study natural lean of tree, location of larger branches, and wind direction. This will help you judge which way tree will fall.

2.Clear work area around tree.

3.Plan and clear a retreat path before felling. Make retreat path opposite to planned direction of fall of tree and at 45° angle (see Figure 13).

Retreat Path

Direction of Fall

45°

Tree

Retreat Path

Figure 13 - Retreat Path From Tree

Continued

ENGLISH

113005

11

www.desatech.com

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Electric Chain SAW Contents Read ALL Instructions Important Safety InformationBefore Operating SAW While Operating SAWKickback Kickback Safety Devices On This SawA dry place Maintenance and Storage of Chain SAWChain SAW Names and Terms UnpackingProduct Identification Top of guide bar face guide bar nose see Figure AssemblyIndicator on side cover of saw Loosen nut SAW Chain Tension AdjustmentBar, allow chain to cool then Oiling Chain Operating Chain SAWTurn chain tensioning screw Clockwise to tension saw chain Filling OIL TankExtension Cords Clearing Sprocket Cover of DebrisPractice until you can maintain a steady, even cutting rate Cutting with the Chain SAWFelling a Tree Cutting Down a Tree Before Felling a TreeCut towards notch Felling Procedure Felling NotchFelling Cut Limbing a TreeLog Supported On Both Ends Bucking a LOGEntire Length Of Log On Ground Log Supported On One EndCutting a Limb Care of Guide BAR Cleaning MaintenanceCleaning SAW Body Normal Guide Bar MaintenanceReplacing SAW Chain Items Needed to Sharpen ChainSharpening Cutters Filing Cutter Depth GaugesStorage Technical ServiceReplacement Parts and Accessories Repair ServiceObserved Fault Possible Cause Remedy TroubleshootingModel Date Purchased Electric Chain SAW Limited WarrantySierra Eléctrica Limpieza Y Mantenimiento Información Importante DE SeguridadLEA Todas LAS Instrucciones Información Importante DE SeguridadAntes DE Utilizar LA Sierra AL Utilizar LA SierraCon el dedo fuera del gatillo ContragolpesLleve la sierra eléctrica de un lugar a otro Mantenimiento Y Almacenamiento DE SU Sierra Eléctrica Retire todos los elementos del embalaje DesembalajeIdentificación DEL Producto Rueda dentada Rueda dentada que impulsa la cadena TerminologíaFigura 5 Bloqueo del retenedor de la barra guía EnsamblajeImportante Ajuste DE Tensión DE LA Cadena SerradaDe 0C, utilice aceite lubricante SAE #10. Si la USO DE LA Sierra EléctricaLubricación Lubricación DE LA Cadena Sistema de lubricación manual30 m Remoción DE Restos DE LA Tapa DE LA Rueda DentadaCables DE Prolongación 15 mAdvertencia Realización DE CortesTala DE UN Árbol Derribamiento de un árbol Antes de derribar un árbolCorte en dirección a la muesca Tala finalProcedimiento de tala Corte de la muesca Siga estas instrucciones para trozar un tronco Desmembramiento DE UN ÁrbolTrozado DE UN Tronco La totalidad del tronco sobre el sueloPoda DE UN Árbol Tronco apoyado en un extremoTronco apoyado sobre ambos extremos Cuidado DE LA Barra DE Guía Limpieza Y MantenimientoLimpieza DEL Cabezal Afilado de los elementos de corte Mantenimiento normal de la barra de guíaAfilado DE LA Cadena Elementos necesarios para afilar la cadenaDentada adecuada a su modelo, consulte la sección Limado de los calibradores de medida de profundidadRecambio DE LA Cadena Serrada Servicio DE Reparación AlmacenamientoServicio Técnico Accesorios Y Piezas DE RepuestoFalla Observada Causa Posible Solución Diagnóstico Y Resolución DE ProblemasModelo Fecha de compra Garantía Limitada DE Sierra EléctricaTronçonneuse Électrique Prime Nettoyage ET Entretien Consignes DE Sécurité ImportantesPendant Lutilisation DE LA Tronçonneuse Agréé voir Service Técnique, Lorsquon est presséConsignes DE Sécurité Importantes Avant D’UTILISER LA TronçonneuseRecul SuiteEntretien ET Remisage DE LA Tronçonneuse Entretien de la tronçonneuse et protection contre le reculLisation sécuritaire et correcte de la tronçonneuse DéballageIdentification DU Produit Vocabulaire DE LA TronçonneuseVoyant sur le capot latéral de la tronçonneuse MontageLe tronçonnage et l’abattage Boulon et sur le dispositif de retenue du guideÉtape Au besoin, resserrer à la main l’écrou du guide- chaîneRéglage DE LA Tension DE LA Chaîne Nettoyage DES Débris DU Couvercle DU Pignon Utilisation DE LA TronçonneuseRemplissage DU Réservoir D’HUILE Lubrification DE LA Chaîne Système de lubrification manuelCordon dalimentation de la tronçonneuse Rallonges ÉlectriquesLe crochet de maintien de la rallonge jusquà ce quil Avertissement Sciage Avec LA TronçonneuseAbattage D’UN Arbre Avant d’abattre un arbre’entaille inférieure Scier en direction du sifflet Procédure d’abattage Sifflet d’abattageTrait d’abattage Enlever le morceau de tronc créé par les deux entaillesTronçonnage D’UNE Bille ÉbranchageTaille D’UN Arbre Élagage Toute la bille repose au solLa bille est soutenue aux deux extrémités La bille est soutenue à une extrémitéNettoyage DU Carter DE Tronçonneuse Nettoyage ET EntretienOutils nécessaires pour affûter la chaîne Entretien DE LA GUIDE-CHAÎNEEntretien normal de la guide-chaîne Affûtage DE LA ChaîneUtiliser le guide lime pour un limage à 30˚ Remplacement DE LA ChaîneAffûtage des taillants Limage des limiteurs de profondeur des taillantsRemisage Service TechniquePièces DE Rechange ET Accessoires Service DE RéparationDéfaillance Observée Cause Possible Remède DépannageGarantie Limitée Pour LA Tronçonneuse Électrique Information SUR LA Garantie113005 Renvoi Pièce DESCRIPTION/DESCRIPCIÓN/DESCRIPTION Parts LIST/LISTA DE REPUESTOS/LISTE DES PiècesContinúa/À suivre Parts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces 113005 113005 Stop
Top Page Image Contents