Remington M12510US, M15012US, M15014US, M15014AS, M30016US, M30016AS, M30016AW, M35016UW, M35016AW

Page 17

STORAGE

If storing saw for more than 30 days, follow steps below.

1.Drain oil tank after each use.

2.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture.

3.Dry guide bar and chain.

4.Place chain in container filled with oil. This will prevent rust.

5.Wipe a thin coating of oil over surface of guide bar.

6.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.

7.Store chain saw

in a high or locked place, out of children’s reach

in a dry place

in a carrying case or with scabbard over guide bar

TECHNICAL SERVICE

You may have further questions about assembling, operating, or maintaining this product. If so, you can visit our Technical Service web site at www. desatech.com or contact our Technical Service Department at 1-800-858-8501 (English Only). You may also write to:

DESA Specialty Products™

ATTN: Technical Service Specialty Products P.O. Box 90004

Bowling Green, KY 42102-9004

When contacting DESA Specialty Products™, have ready

Your Name

Your Address

Your Phone Number

Model Number of Product

Date of Purchase (Include copy of receipt for writ- ten requests).

REPLACEMENT PARTS AND ACCESSORIES

WARNING:Useonlyreplacementparts andaccessoriesdescribedinthismanual. Use of other parts or accessories could damage saw or injure operator.

For original replacement parts and accessories, con- tact your nearest Authorized Dealer or Authorized Service Center for this product. If they can not sup- ply the part or accessory, contact your nearest Parts Central listed on page 65. Each Authorized Dealer, Authorized Service Center, and Parts Central is independently owned and operated.

See pages 62 through 64 for an Illustrated Parts List. If you need additional referral information, contact our Technical Service Department (see Technical Service). In Canada call 1-800-561-3372 for parts information.

REPAIR SERVICE

Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

Each Authorized Service Center is independently owned and operated.

WARRANTY SERVICE

If product requires warranty service, return it to nearest Authorized Service Center. You must show proof of purchase. If faulty materials or workmanship caused damage, we will repair or replace product without charge. Note: Normal wear, misuse, abuse, neglect, or accidental damage is not covered under warranty.

NON-WARRANTY SERVICE

If product requires service, return it to nearest Autho- rized Service Center. Repairs will be billed to you at regular repair list prices.

For additional Service Center or warranty informa- tion, call 1-800-858-8501 or visit our Technical Service web site at www.desatech.com.

ENGLISH

113005

17

www.desatech.com

Image 17
Contents Electric Chain SAW Contents Before Operating SAW Important Safety InformationWhile Operating SAW Read ALL InstructionsKickback Kickback Safety Devices On This SawA dry place Maintenance and Storage of Chain SAWChain SAW Names and Terms UnpackingProduct Identification Top of guide bar face guide bar nose see Figure AssemblyIndicator on side cover of saw Loosen nut SAW Chain Tension AdjustmentBar, allow chain to cool then Turn chain tensioning screw Clockwise to tension saw chain Operating Chain SAWFilling OIL Tank Oiling ChainExtension Cords Clearing Sprocket Cover of DebrisFelling a Tree Cutting Down a Tree Cutting with the Chain SAWBefore Felling a Tree Practice until you can maintain a steady, even cutting rateFelling Cut Felling Procedure Felling NotchLimbing a Tree Cut towards notchEntire Length Of Log On Ground Bucking a LOGLog Supported On One End Log Supported On Both EndsCutting a Limb Cleaning SAW Body Cleaning MaintenanceNormal Guide Bar Maintenance Care of Guide BARSharpening Cutters Items Needed to Sharpen ChainFiling Cutter Depth Gauges Replacing SAW ChainReplacement Parts and Accessories Technical ServiceRepair Service StorageObserved Fault Possible Cause Remedy TroubleshootingModel Date Purchased Electric Chain SAW Limited WarrantySierra Eléctrica Limpieza Y Mantenimiento Información Importante DE SeguridadAntes DE Utilizar LA Sierra Información Importante DE SeguridadAL Utilizar LA Sierra LEA Todas LAS InstruccionesCon el dedo fuera del gatillo ContragolpesLleve la sierra eléctrica de un lugar a otro Mantenimiento Y Almacenamiento DE SU Sierra Eléctrica Retire todos los elementos del embalaje DesembalajeIdentificación DEL Producto Rueda dentada Rueda dentada que impulsa la cadena TerminologíaFigura 5 Bloqueo del retenedor de la barra guía EnsamblajeImportante Ajuste DE Tensión DE LA Cadena SerradaLubricación USO DE LA Sierra EléctricaLubricación DE LA Cadena Sistema de lubricación manual De 0C, utilice aceite lubricante SAE #10. Si laCables DE Prolongación Remoción DE Restos DE LA Tapa DE LA Rueda Dentada15 m 30 mTala DE UN Árbol Derribamiento de un árbol Realización DE CortesAntes de derribar un árbol AdvertenciaCorte en dirección a la muesca Tala finalProcedimiento de tala Corte de la muesca Trozado DE UN Tronco Desmembramiento DE UN ÁrbolLa totalidad del tronco sobre el suelo Siga estas instrucciones para trozar un troncoPoda DE UN Árbol Tronco apoyado en un extremoTronco apoyado sobre ambos extremos Cuidado DE LA Barra DE Guía Limpieza Y MantenimientoLimpieza DEL Cabezal Afilado DE LA Cadena Mantenimiento normal de la barra de guíaElementos necesarios para afilar la cadena Afilado de los elementos de corteDentada adecuada a su modelo, consulte la sección Limado de los calibradores de medida de profundidadRecambio DE LA Cadena Serrada Servicio Técnico AlmacenamientoAccesorios Y Piezas DE Repuesto Servicio DE ReparaciónFalla Observada Causa Posible Solución Diagnóstico Y Resolución DE ProblemasModelo Fecha de compra Garantía Limitada DE Sierra EléctricaTronçonneuse Électrique Prime Nettoyage ET Entretien Consignes DE Sécurité ImportantesConsignes DE Sécurité Importantes Agréé voir Service Técnique, Lorsquon est presséAvant D’UTILISER LA Tronçonneuse Pendant Lutilisation DE LA TronçonneuseRecul SuiteEntretien ET Remisage DE LA Tronçonneuse Entretien de la tronçonneuse et protection contre le reculIdentification DU Produit DéballageVocabulaire DE LA Tronçonneuse Lisation sécuritaire et correcte de la tronçonneuseLe tronçonnage et l’abattage MontageBoulon et sur le dispositif de retenue du guide Voyant sur le capot latéral de la tronçonneuseÉtape Au besoin, resserrer à la main l’écrou du guide- chaîneRéglage DE LA Tension DE LA Chaîne Remplissage DU Réservoir D’HUILE Utilisation DE LA TronçonneuseLubrification DE LA Chaîne Système de lubrification manuel Nettoyage DES Débris DU Couvercle DU PignonCordon dalimentation de la tronçonneuse Rallonges ÉlectriquesLe crochet de maintien de la rallonge jusquà ce quil Abattage D’UN Arbre Sciage Avec LA TronçonneuseAvant d’abattre un arbre AvertissementTrait d’abattage Procédure d’abattage Sifflet d’abattageEnlever le morceau de tronc créé par les deux entailles ’entaille inférieure Scier en direction du siffletTronçonnage D’UNE Bille ÉbranchageLa bille est soutenue aux deux extrémités Toute la bille repose au solLa bille est soutenue à une extrémité Taille D’UN Arbre ÉlagageNettoyage DU Carter DE Tronçonneuse Nettoyage ET EntretienEntretien normal de la guide-chaîne Entretien DE LA GUIDE-CHAÎNEAffûtage DE LA Chaîne Outils nécessaires pour affûter la chaîneAffûtage des taillants Remplacement DE LA ChaîneLimage des limiteurs de profondeur des taillants Utiliser le guide lime pour un limage à 30˚Pièces DE Rechange ET Accessoires Service TechniqueService DE Réparation RemisageDéfaillance Observée Cause Possible Remède DépannageGarantie Limitée Pour LA Tronçonneuse Électrique Information SUR LA Garantie113005 Renvoi Pièce DESCRIPTION/DESCRIPCIÓN/DESCRIPTION Parts LIST/LISTA DE REPUESTOS/LISTE DES PiècesContinúa/À suivre Parts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces 113005 113005 Stop