Menus and Parameter
Descriptions |
| Menus and Parameters |
|
|
|
Input | Used to select | |
| limits, and scaling. | |
Display | Used to set or change decimal position and display units. | |
Output | Used to specify output usage, control methods, and alarms. | |
Control | Used to select parameters associated with the control methods. | |
Alarm | Used to select alarm parameters . | |
| Note: This menu is also functional for controllers not | |
| equipped with alarm hardware; however, alarm indication | |
| will be only visual via the A1 and A2 LEDs on the front panel. | |
Tune | Used to set the autotune damping parameter. | |
Recipe | Used to set ramp and soak parameters. | |
Supervisor | Used to set | |
Calibration | Used to recalibrate input. | |
Option | Used to select installed option. | |
Communications | (Option) Used to set serial communications parameters. | |
Contact/Digital |
|
|
Input | (Option) Used to select switch input functions. | |
Remote Analog |
|
|
Setpoint | (Option) Used to enter remote analog setpoint parameters. | |
Auxiliary Output | (Option) Used to set auxiliary output parameters. |
14