Dimensions
Figure 2. Case Dimensions
| 2.100" | 0.717" |
| (53.3mm) | |
|
| (8.21 mm) |
| O1 | PV |
| O2 | |
2.100" | A1 |
|
F1A2 |
| |
(53.3mm) | SV | |
| F2 |
|
4.654" (118.21mm) 3.937"
(100 mm)
1.750"
(44.5 mm)
Prior to mounting the Series C in your panel, make sure that the cutout opening is of the right size, 1.771” x 1.771” (45
mmx 45 mm), and deburred to enable a smooth fit. A mini- mum of 4” (100 mm) of depth behind the panel is required.
Mounting
When properly installed through a NEMA enclosure, the integrity of the enclosure will be maintained and will remain “Watertight.”
Figure 3. Series C Mechanical Components
Insert the Series C through the front panel cutout and slide the mounting collar back onto the unit from behind the panel. Push the mounting collar up tight to the back of the mounting panel.
Bezel | Case Clip |
| |
Grips |
|
Gasket | Customer Panel |
2