Quick Setup Instructions - Series 16C Temperature Controller
Experienced users, already familiar with the Series 16C, and using the controller with PID outputs, may follow these condensed instructions to autotune the controller and get started quickly once the instrument is prop-
erly mounted and wired, and the Security Level is set to 
. Once setup is complete, we recommend changing the Security Level back to the most restrictive level suitable for your application.
These quick setup instructions are not meant as a substitute for reading the full instruction manual supplied with the controller. Please be sure to read
through the manual for specific details of operation and, most importantly, for safety precautions. If you have any questions, or experience problems with setting up your controller, consult the full instruction manual first and, if you still need assistance, contact your Athena representative or call
Menu Access | Raise | Lower | Mode/Enter |
1.Apply power. After
Mode/Enter 
key for 3 seconds, the 
or 
key until 
appears, and then the 
key again.
will flash, alternating with the Process Value.
2.Press and hold the Menu Access 
key for 3 seconds until 
is displayed. Press 
key once until
appears, then use 
or 
keys to select sensor input type.
3.Press 
to display 
. Then press 
once to display 
. Use 
or 
to select 
.
4.Press the 
key until Output 1 Action 
is displayed. Select the desired output action using the 
or 
keys. (Reverse = Heating)
41