OPERATING INSTRUCTIONS
ÎSTEP 1:
Connect the high pressure hose to the unit’s high pressure outlet.
Î STEP 2: |
Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position.
Î STEP 3: |
Connect garden hose to unit’s water inlet.
Î STEP 4: |
Connect garden hose to the cold water source and turn water on completely.
ÎSTEP 5:
Plug the Ground Fault Circuit Inter- rupter (GFCI) into a working outlet.
–Press “RESET” button.
–Press “TEST” button.
Red indicator on “RESET” button should appear.
–Press “RESET” button again for use.
WARNING
Do not use if above test fails.
Note: The actual appearance of the GFCI may be different from this illustration.
ÎSTEP 6:
Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
ÎSTEP 7:
Turn on the high pressure washer (I).
The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.
6English