Briggs & Stratton 020324-0 manual Broken bones, fractures, bruises, or sprains could result

Page 6

WARNING

Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises, or sprains could result.

•NEVER pull starter cord without first relieving spray gun pressure.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•After each starting attempt, where engine fails to run, always point spray gun in safe direction, press red button and squeeze spray gun trigger to release high pressure.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when spray gun kicks back.

WARNING

Contact with muffler area can result in serious burns.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot parts and AVOID hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 feet (1.5 m) of clearance on all sides of pressure washer including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•DO NOT allow CHILDREN to operate pressure washer.

•NEVER repair high pressure hose. Replace it.

•NEVER repair leaking connections with sealant of any kind. Replace o-ring or seal.

•NEVER connect high pressure hose to nozzle extension.

•Keep high pressure hose connected to pump and spray gun while system is pressurized.

•ALWAYS point spray gun in safe direction, press red button and squeeze spray gun trigger, to release high pressure, every time you stop engine.

•NEVER aim spray gun at people, animals, or plants.

•DO NOT secure spray gun in open position.

•DO NOT leave spray gun unattended while machine is running.

•NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

•Always be certain spray gun, nozzles and accessories are correctly attached.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

•Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

4

BRIGGSandSTRATTON.COM

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Engine Where to Find UsPressure Washer Date Purchased Table of Contents Hazard Symbols and Meanings Operator SafetySafety Rules Equipment DescriptionWhen Adding or Draining Fuel Broken bones, fractures, bruises, or sprains could result Contact with muffler area can result in serious burnsUnintentional sparking can result in fire or electric shock Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassAttach Handle AssemblyUnpack Pressure Washer Items in the carton includeFuel must meet these requirements Add Engine OilAdd Fuel High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpFeatures and Controls Pump Develops high pressureOperation Pressure Washer LocationClearances and Air Movement How to Start Your Pressure Washer DayHow to Stop Your Pressure Washer Lever to Choke position, then to Run positionHow to Use Spray Tips Cleaning and Applying DetergentCleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal Relief Maintenance Maintenance SchedulePressure Washer Maintenance Pump Oil Maintenance Engine MaintenanceChanging Engine Oil Checking Oil LevelAdding Engine Oil Make sure unit is on a level surfaceService Spark Plug Service Air CleanerTo service the air cleaner, follow these steps Spark Arrester ServiceAfter Each Use Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionEmissions Control System Warranty Owner’s Warranty ResponsibilitiesWarranties Maintenance Emission InformationClaims and Coverage Exclusions Limited Warranty Model Product SpecificationsCommon Service Parts 800Manual del Operario Motor Dónde encontrarnosLimpiadora a Presión Fecha de compraMontaje Resolución de problemas GarantíasSeguridad de Operario Características y mandos OperandoSeguridad de Operario Derscripción del EquipoReglas de seguridad Riesgo de electrocución Opere el limpiadora a presión Solamente al aire libreCuando Pruebe LA Bujía DEL Motor Aviso Conecte el manubrio MontajeDesembale la limpiadora a presión Los artículos que se encuentran en la caja sonEl combustible debe reunir los siguientes requisitos Agregar aceite al motorAgregue combustible Evite el daño del limpiadora a presiónConecte la manguera y el suministro de agua a la bomba Lista de revision previa al arranque del motorProporcione el suministro de agua adecuado Características y mandos Bomba Desarrolla alta presión de aguaCómo darle arranque a su máquina limpiadora a presión OperandoUbicación del limpiadora a presión Espacio libre alrededor del limpiadora a presiónAhogado Choke Cómo detener su máquina limpiadora a presión Cómo usar las puntas de rocíoSugerencias de uso Limpieza y aplicación del detergentePara cambiar las puntas de rocío Para aplicar el detergente, siga los siguientes pasosSistema de enfriamiento automático alivio térmico Enjuague de la máquina limpiadora a presiónLimpieza del tubo de inyección de detergente Para enjuagarRecomendaciones generales MantenimientoPlan de mantenimiento Control de emisionesMantenimiento de la limpiadora a presión Mantenimiento de la bomba de aceite Mantenimiento del motorCambio de aceite del motor Comprobación del nivel de aceiteAdición de Aceite del Motor Servicio del depurador de aireServicio del bujía Servicio del apagachispasSistema de refrigeración de aire Despues de cada uso Almacenamiento para invierno Almacenamiento prolongadoResolución de problemas Problema Causa SoluciónGarantía del sistema de control de emisiones Responsabilidades de la garantía del propietarioInformación sobre emisiones Garantía Limitada Modelo Especificaciones del productoServicio común despide Temperatura del suministro
Top Page Image Contents