Powermate P-FTT-160MD-[E] specifications Engine Preparation, Engine Oil

Page 11

Engine Preparation (Continued)

• Save all instructions

A Engine Oil

SAE

SAE 10W-30

 

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEMP -20

0

20

40

60

80

 

100° F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30

 

-20

-10

0

10

20

30 40° C

 

 

 

 

Ambient Service Temperature

 

 

 

 

CAUTION

Engine shipped without oil. Failure to add oil will result in serious engine damage.

A bottle of SAE 30 engine oil is included with your tiller. Refer to the chart on the right for alternative oil types to use at different temperatures. Always use a high quality detergent oil classified “For Service, SG, SH, SJ” or higher. Do not use special additives.

CAUTION

CAUTION

Frequently check oil level while filling. DO NOT OVERFILL. DO NOT UNDERFILL. Running engine at improper oil level will seriously damage engine.

6.Replace and tighten dipstick.

7.Clean up any spilled oil.

NOTE: THE TRANSMISSION CASE COMES FROM THE FACTORY WITH THE PROPER AMOUNT AND TYPE OF GEAR OIL.

Fuel Tank Cap

Oil Fill Cap/Dipstick

Depth Regulator Lever

Figure 6

Always use recommended oil type. Using dirty oil or incorrect oil type such as 2-stroke engine oil will damage the engine.

NOTE: Engine Oil Capacity is 600 ml. For first time fill, simply add the entire contents of the provided oil bottle to the crankcase.

HOW TO CHECK OIL LEVEL AND FILL TO PROPER LEVEL

WARNING

Before checking oil, make sure engine is off, and spark plug wire has been disconnected from spark plug.

1. Place the tiller on a level surface and make sure the depth regulator lever is set so the main frame of the tiller is level. (See Figure 6)

2.Remove the oil fill cap/dipstick and wipe clean with cloth.

(See Figure 6)

3.Insert dipstick into fill spout but do NOT screw in. Remove dipstick and check oil level.

4.When oil level is full, the oil will be at upper limit on dip stick. If oil level is near or below the lower limit, oil must be added. (See Figure 7)

5.Add oil slowly until the oil level reaches the upper limit of the dipstick. Use a funnel or nozzle to reduce spillage.

Upper Limit

Lower Limit

Oil Fill Cap/

Dipstick

Figure 7

Questions? Call Toll Free at 1-800-737-2112

10

Copyright © 2009 MAT Engine Technologies, LLC

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operator’s Manual Front Tine Rotary TillerControl and Operating Symbols Safety DefinitionsSafety Alert Symbols Safety Warning SymbolsResponsibility of Operator Important Safety InformationPreparation Safety Operation SafetyFuel Safety Operation SafetyChildren Safety Storage SafetyREPAIR, MAINTENANCE, and Adjustment Safety Refer to Engine Manual for Detailed Engine Specs Product SpecificationsParts & Features Safety Decals How to Remove Tiller from Carton AssemblyAttach Upper Handle See Figure Install the Wheels See FigureAssembly Instructions Assembly Save all instructions Engine Oil Engine PreparationStart the Engine OperationTilling Mode Transport ModeDepth Regulator Lever See Figure Clutch Lever AdjustmentsTilling Tips Belt Tension Adjustment See FigureTo increase belt tension To Decrease Belt TensionService MaintenancePeriodic Maintenance Schedule Table Service RecordsCheck or Fill Engine Crankcase Engine MaintenanceClean Tine Axle Shaft Change BeltsHow to Prepare for Storage Technical ServiceProblem Possible Causes Solutions Powermate Rotary Tiller Limited Warranty WarrantyManufacturer’s Warranty Coverage Warranty Save all instructionsEmisson Control System Warranty Your Warranty Rightes and ObligationsLimitations of Liability Warranty CoverageHow to Obtain Warranty Service ExclusionsSystems Covered by this Warranty Parts Description WarrantyPage Manual de operación Motocultivadora rotativa con trenSímbolos de control y operación Definiciones de seguridadSímbolos de alerta sobre seguridad Símbolos de advertencia sobre seguridadSeguridad Durante LA Operación Información importante sobre seguridadResponsabilidad DEL Operador Seguridad Durante LA PreparaciónSeguridad DEL Combustible Información importante sobre seguridad ContinuaciónSeguridad Durante LA Operación Continuación Seguridad DE Niños Seguridad DE AlmacenamientoSeguridad Durante LA REPARACIÓN, Mantenimiento Y Ajuste Piezas y características Especificaciones del productoMarbetes de seguridad Cómo sacar la motocultivadora de la caja MontajeGratuitamente AL Instalar LAS Ruedas véase la figuraInstalar EL Regulador DE Profundidad Montaje Continuación Conserve todas las instruccionesFigura 5b Cómo Revisar EL Nivel DE Aceite Y Llenar AL Nivel Apropiado Preparación del motorParar el motor OperaciónInspección prearranque Arrancar el motorModo de transporte y modo de labranza Operación Continuación Conserve todas las instruccionesVelocidad de operación ApagadoAjustes Palanca DEL Embrague véase la figuraPalanca DEL Regulador DE Profundidad Palanca del embraguePara Reducir LA Tensión DE LA Correa Ajuste DE LA Tensión DE LA CorreaPara aumentar la tensión de la correa Programa de mantenimiento MantenimientoTabla DE Programa DE Mantenimiento Periódico Lubricación Mantenimiento ContinuaciónCambiar LAS Correas Revisar O Llenar EL Cárter DEL CigüeñalCómo preparar la motocultivadora para almacenamiento Servicio técnicoProblema CAUSA/S POSIBLE/S Solución / Soluciones Diagnóstico y resolución de problemasGarantía Cobertura de la garantía del fabricante Garantía Continuación Conserve todas las instruccionesGarantía del sistema pro control de emisiones contaminantes Derechos y obligaciones al amparo de la garantíaLimitaciones de responsabilidad Cobertura de la garantíaCómo obtener servicio de garantía ExclusionesGarantía Continuación

P-FTT-160MD, P-FTT-160MD-[E] specifications

The Powermate P-FTT-160MD-[E],P-FTT-160MD is a high-performing, versatile inverter generator designed for both recreational and professional use. With a robust engineering focus, this generator provides optimal performance and reliability for a variety of applications, from powering tools on job sites to providing electricity during outdoor camping trips.

One of the standout features of the Powermate P-FTT-160MD is its impressive power output. It boasts a starting wattage of 1600 watts and a running wattage of 1400 watts, making it capable of handling multiple devices simultaneously. This power capacity makes it an excellent choice for running essential appliances, including refrigerators, lights, and power tools, ensuring that users can meet their energy needs with ease.

The generator utilizes advanced inverter technology, which creates clean and stable electricity that is safe for sensitive electronics. This is particularly important for those who need to power devices such as laptops, smartphones, and other gadgets, as the inverter technology minimizes the risk of damage caused by voltage fluctuations. The quiet operation is another advantage, with operating noise levels significantly lower than traditional generators, making it suitable for use in residential areas and quiet outdoor settings.

Portability is a key characteristic of the Powermate P-FTT-160MD. Weighing in at a manageable point, it features a convenient carry handle that makes transportation easy. This design element allows users to effortlessly take the generator to various locations, whether it be for camping trips, tailgating, or emergency power needs at home.

Efficiency is paramount, and the Powermate P-FTT-160MD is equipped with an eco-mode feature. This function adjusts the engine speed based on the load, optimizing fuel consumption and allowing for longer run times on a single tank of fuel. It also contributes to lower emissions, making it an environmentally friendly choice for those who prioritize sustainability.

Safety features are also integrated into the generator design, including overload protection and low oil shutdown, which prevent potential damage and enhance user safety.

In summary, the Powermate P-FTT-160MD-[E],P-FTT-160MD inverter generator excels in delivering reliable power, portability, and user-friendly features. Its combination of advanced technology, efficiency, and safety makes it a trusted option for users seeking dependable power solutions in a variety of environments.
Top Page Image Contents