Powermate P-FTT-160MD-[E] Depth Regulator Lever See Figure, Clutch Lever Adjustments

Page 14

Operation (Continued)

• Save all instructions

H Clutch Lever

I Adjustments

CAUTION

WARNING

This information is provided here only to intro- duce the controls. Do not start the engine at this time. Starting and operating instructions are given on page 11. Please read this section and all operat- ing and safety instructions before starting your tiller.

Engine should be off before adjusting any controls.

WARNING

DO NOT FIX THE CLUTCH LEVER IN DRIVE POSITION BY ANY OTHER MEANS THAN MANUALLY USING YOUR RIGHT HAND. DO NOT TIE OR OTHERWISE SECURE THE LEVERS IN DRIVE POSITION.

•To stop the tines at any time release the CLUTCH levers.

CLUTCH LEVER (See Figure 13)

Engages tines into forward. Pushing down the clutch lever toward the handlebar engages the tines. Releasing the lever stops the tines and brings the tiller to a complete stop.

DEPTH REGULATOR LEVER (See Figure 2)

Tilling depth is controlled by the height of the depth regulator lever. To adjust tilling depth:

1.Remove pin and cotter key.

2.Raise the depth regulator lever to position tines at chosen tilling depth.

3.Align hole in depth regulator lever with hole in depth regulator bracket and replace pin and cotter key.

Depth Regulator Lever Down = Shallower tilling.

Place the pin in the top hole of the depth regulator lever for shallowest tilling.

Depth Regulator Lever Up = Deeper tilling.

Place the pin in the bottom hole of the depth regulator lever for deepest tilling.

Forward Lever Engaged

WARNING

Do not adjust tilling depth unless Clutch lever is released and engine is turned off.

Figure 13

Questions? Call Toll Free at 1-800-737-2112

13

Copyright © 2009 MAT Engine Technologies, LLC

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Front Tine Rotary Tiller Operator’s ManualSafety Warning Symbols Safety DefinitionsSafety Alert Symbols Control and Operating SymbolsOperation Safety Important Safety InformationPreparation Safety Responsibility of OperatorOperation Safety Fuel SafetyChildren Safety Storage SafetyREPAIR, MAINTENANCE, and Adjustment Safety Refer to Engine Manual for Detailed Engine Specs Product SpecificationsParts & Features Safety Decals Assembly How to Remove Tiller from CartonAttach Upper Handle See Figure Install the Wheels See FigureAssembly Instructions Assembly Save all instructions Engine Preparation Engine OilOperation Start the EngineTransport Mode Tilling ModeClutch Lever Adjustments Depth Regulator Lever See FigureTo Decrease Belt Tension Belt Tension Adjustment See FigureTo increase belt tension Tilling TipsService Records MaintenancePeriodic Maintenance Schedule Table ServiceChange Belts Engine MaintenanceClean Tine Axle Shaft Check or Fill Engine CrankcaseTechnical Service How to Prepare for StorageProblem Possible Causes Solutions Warranty Powermate Rotary Tiller Limited WarrantyYour Warranty Rightes and Obligations Warranty Save all instructionsEmisson Control System Warranty Manufacturer’s Warranty CoverageExclusions Warranty CoverageHow to Obtain Warranty Service Limitations of LiabilityWarranty Systems Covered by this Warranty Parts DescriptionPage Motocultivadora rotativa con tren Manual de operaciónSímbolos de advertencia sobre seguridad Definiciones de seguridadSímbolos de alerta sobre seguridad Símbolos de control y operaciónSeguridad Durante LA Preparación Información importante sobre seguridadResponsabilidad DEL Operador Seguridad Durante LA OperaciónSeguridad DEL Combustible Información importante sobre seguridad ContinuaciónSeguridad Durante LA Operación Continuación Seguridad DE Niños Seguridad DE AlmacenamientoSeguridad Durante LA REPARACIÓN, Mantenimiento Y Ajuste Especificaciones del producto Piezas y característicasMarbetes de seguridad Montaje Cómo sacar la motocultivadora de la cajaMontaje Continuación Conserve todas las instrucciones Instalar LAS Ruedas véase la figuraInstalar EL Regulador DE Profundidad Gratuitamente ALFigura 5b Preparación del motor Cómo Revisar EL Nivel DE Aceite Y Llenar AL Nivel ApropiadoArrancar el motor OperaciónInspección prearranque Parar el motorApagado Operación Continuación Conserve todas las instruccionesVelocidad de operación Modo de transporte y modo de labranzaPalanca del embrague Palanca DEL Embrague véase la figuraPalanca DEL Regulador DE Profundidad AjustesPara Reducir LA Tensión DE LA Correa Ajuste DE LA Tensión DE LA CorreaPara aumentar la tensión de la correa Programa de mantenimiento MantenimientoTabla DE Programa DE Mantenimiento Periódico Revisar O Llenar EL Cárter DEL Cigüeñal Mantenimiento ContinuaciónCambiar LAS Correas LubricaciónServicio técnico Cómo preparar la motocultivadora para almacenamientoDiagnóstico y resolución de problemas Problema CAUSA/S POSIBLE/S Solución / SolucionesGarantía Derechos y obligaciones al amparo de la garantía Garantía Continuación Conserve todas las instruccionesGarantía del sistema pro control de emisiones contaminantes Cobertura de la garantía del fabricanteExclusiones Cobertura de la garantíaCómo obtener servicio de garantía Limitaciones de responsabilidadGarantía Continuación

P-FTT-160MD, P-FTT-160MD-[E] specifications

The Powermate P-FTT-160MD-[E],P-FTT-160MD is a high-performing, versatile inverter generator designed for both recreational and professional use. With a robust engineering focus, this generator provides optimal performance and reliability for a variety of applications, from powering tools on job sites to providing electricity during outdoor camping trips.

One of the standout features of the Powermate P-FTT-160MD is its impressive power output. It boasts a starting wattage of 1600 watts and a running wattage of 1400 watts, making it capable of handling multiple devices simultaneously. This power capacity makes it an excellent choice for running essential appliances, including refrigerators, lights, and power tools, ensuring that users can meet their energy needs with ease.

The generator utilizes advanced inverter technology, which creates clean and stable electricity that is safe for sensitive electronics. This is particularly important for those who need to power devices such as laptops, smartphones, and other gadgets, as the inverter technology minimizes the risk of damage caused by voltage fluctuations. The quiet operation is another advantage, with operating noise levels significantly lower than traditional generators, making it suitable for use in residential areas and quiet outdoor settings.

Portability is a key characteristic of the Powermate P-FTT-160MD. Weighing in at a manageable point, it features a convenient carry handle that makes transportation easy. This design element allows users to effortlessly take the generator to various locations, whether it be for camping trips, tailgating, or emergency power needs at home.

Efficiency is paramount, and the Powermate P-FTT-160MD is equipped with an eco-mode feature. This function adjusts the engine speed based on the load, optimizing fuel consumption and allowing for longer run times on a single tank of fuel. It also contributes to lower emissions, making it an environmentally friendly choice for those who prioritize sustainability.

Safety features are also integrated into the generator design, including overload protection and low oil shutdown, which prevent potential damage and enhance user safety.

In summary, the Powermate P-FTT-160MD-[E],P-FTT-160MD inverter generator excels in delivering reliable power, portability, and user-friendly features. Its combination of advanced technology, efficiency, and safety makes it a trusted option for users seeking dependable power solutions in a variety of environments.
Top Page Image Contents