Technical Service

Maintenance (Continued)

• Save all instructions

D How to Prepare for Storage

WARNING

Never store the tiller indoors with fuel in the fuel tank. Never store in an enclosed, poorly ventilated area where fumes could reach an open flame, a spark or a pilot light as on a furnace, water heater or clothes dryer. Allow engine to cool before storing unit.

WARNING

Do not remove gasoline while inside a building, near a fire, or while you smoke. Gasoline fumes can cause an explosion or a fire.

NOTE: A yearly checkup or tune-up at an authorized service center will make sure that the tiller will provide maximum per- formance for the next season.

When the tiller is put in storage for thirty days or more, the following steps should be followed to make sure the tiller is in good condition the next season.

1.Let the engine run until it is out of gasoline.

2.Change the oil by following instructions under “How to Change the Oil.”

3.Remove the spark plug from the cylinder. Pour one ounce of oil into the cylinder. Slowly pull the recoil-start grip so that the oil will protect the cylinder. Install a new spark plug in the cylinder. Pull starter handle slowly a few times to distribute oil. Pull recoil slowly until resistance is felt. This will close the cylinder valves.

WARNING

DO NOT attach spark plug wire to spark plug when storing unit.

4.Clean tiller. Remove all dirt, leaves, debris, grease, etc. from the tiller - including cylinder cooling fans, recoil starter cover holes, under fuel tank, and under muffler.

5.Check the tiller for worn or damaged parts. Have damaged parts replaced if necessary.

6.Tighten any loose hardware.

7.Apply lubrication as directed in Maintenance section.

8.Put the unit in a building that has good ventilation.

9.Cover the tiller with a breathing material.

You may have further questions about assembling, operating, or maintaining this TILLER. If so, you can contact our Technical Service Department at 1-800-737-2112 (English only).

You may also write to:

METL Corporate Office - CORRESPONDENCE ONLY

ATTN: Technical Service – METL

6700 Wildlife Way

Long Grove, IL 60047

When contacting the Technical Service Department, have ready:

•Your Name

•Your Address

•Your Phone Number

If you need assistance or have any questions, CALL TOLL FREE: 1-800-737-2112.

•Model Number of Product

•Date of Purchase (include copy of receipt for written requests)

Questions? Call Toll Free at 1-800-737-2112

P-FTT-160MD, P-FTT-160MD-[E] specifications

The Powermate P-FTT-160MD-[E],P-FTT-160MD is a high-performing, versatile inverter generator designed for both recreational and professional use. With a robust engineering focus, this generator provides optimal performance and reliability for a variety of applications, from powering tools on job sites to providing electricity during outdoor camping trips.

One of the standout features of the Powermate P-FTT-160MD is its impressive power output. It boasts a starting wattage of 1600 watts and a running wattage of 1400 watts, making it capable of handling multiple devices simultaneously. This power capacity makes it an excellent choice for running essential appliances, including refrigerators, lights, and power tools, ensuring that users can meet their energy needs with ease.

The generator utilizes advanced inverter technology, which creates clean and stable electricity that is safe for sensitive electronics. This is particularly important for those who need to power devices such as laptops, smartphones, and other gadgets, as the inverter technology minimizes the risk of damage caused by voltage fluctuations. The quiet operation is another advantage, with operating noise levels significantly lower than traditional generators, making it suitable for use in residential areas and quiet outdoor settings.

Portability is a key characteristic of the Powermate P-FTT-160MD. Weighing in at a manageable point, it features a convenient carry handle that makes transportation easy. This design element allows users to effortlessly take the generator to various locations, whether it be for camping trips, tailgating, or emergency power needs at home.

Efficiency is paramount, and the Powermate P-FTT-160MD is equipped with an eco-mode feature. This function adjusts the engine speed based on the load, optimizing fuel consumption and allowing for longer run times on a single tank of fuel. It also contributes to lower emissions, making it an environmentally friendly choice for those who prioritize sustainability.

Safety features are also integrated into the generator design, including overload protection and low oil shutdown, which prevent potential damage and enhance user safety.

In summary, the Powermate P-FTT-160MD-[E],P-FTT-160MD inverter generator excels in delivering reliable power, portability, and user-friendly features. Its combination of advanced technology, efficiency, and safety makes it a trusted option for users seeking dependable power solutions in a variety of environments.