Powermate P-FTT-160MD-[E] specifications Transport Mode, Tilling Mode

Page 13

Operation (Continued)

• Save all instructions

 

 

 

WARNING

 

 

C Stop the Engine

1. Move choke lever to “OFF” position. (Figure 10)

 

TEMPERATURE OF MUFFLER AND NEAR BY AREAS MAY EX-

 

 

 

CEED 150˚F. AVOID THESE AREAS.

 

 

 

DO NOT MOVE CHOkE CONTROL TO CHOkE TO STOP EN-

 

 

 

GINE, BACKFIRE OR ENGINE DAMAGE MAY OCCUR.

 

 

 

TO STOP TINES AT ANY TIME, RELEASE CLUTCH LEVER TO

 

 

 

NEUTRAL POSITION.

 

 

 

ALWAYS RELEASE CLUTCH LEVER TO NEUTRAL POSITION

 

 

 

AND STOP THE ENGINE bEFORE ADJUSTING THE DEPTH OF

 

 

 

THE REGULATOR LEVER.

Figure 10

D Operating Speed

For normal tilling, set the throttle lever to ˝fast˝.

E Shutting Down

To stop the engine at any time, move choke lever to “OFF” position. To stop tines at any time, release clutch lever.

F Transport Mode and Tilling Mode (See Figure 11 and 12)

Transport Mode

Fold the wheel under the engine for convenient transport.

Tilling Mode

Unfold the wheel back for tilling operation.

G Tilling

1. Adjust the depth regulator lever to desired tilling depth.

DANGER

ENGINE AND SURROUNDING PARTS BECOME EXTREMELY HOT DURING NORMAL USE AND WILL CAUSE SERIOUS bURN INJURIES IF TOUCHED bEFORE THE ENGINE HAS COOLED.

ALLOW ENGINE TO COOL COMPLETELY bEFORE TOUCHING THESE HOT SURFACES.

IMPORTANT: PRACTICE OPERATING THE CONTROLS AND TIL- LER WITH TINES OUT OF GROUND bEFORE bEGINNING TO TILL. IT IS IMPORTANT THAT YOU kNOW HOW TO USE THE TILLER PROPERLY, kEEP CONTROL AT ALL TIMES, STOP THE TINES AND WHEELS FROM TURNING, AND STOP THE ENGINE IF NECESSARY. IF YOU DO NOT kNOW HOW TO DO THESE THINGS, READ THE CONTROLS, ADJUSTMENTS AND SAFETY SECTIONS BEFORE PROCEEDING.

WARNING

NOTE: Raise depth regulator lever up one hole at a time, testing tiller operation after each raise. Raising depth regulator lever too high can result in loss of control of

tiller!

2.Move the throttle control to fast.

3.Pushing down on the clutch lever will engage the tines to move tiller forward.

NOTE: You can slow the tiller’s forward advance at any time by putting slight downward pressure on the handlebars. You can stop the tiller by releasing the clutch lever.

CAUTION

ALWAYS PRESS CLUTCH LEVER LAVERS DOWN COMPLETE ONTO THE HANDLE bAR GRIPS. FAILURE TO DO SO MAY RESULT IN EXCESSIVE DRIVE BELT WEAR AND PRE- MATURE DRIVE BELT FAILURE.

Questions? Call Toll Free at 1-800-737-2112

12

Figure 11

Figure 12

Copyright © 2009 MAT Engine Technologies, LLC

Image 13
Contents Operator’s Manual Front Tine Rotary TillerSafety Alert Symbols Safety DefinitionsSafety Warning Symbols Control and Operating SymbolsPreparation Safety Important Safety InformationOperation Safety Responsibility of OperatorFuel Safety Operation SafetyREPAIR, MAINTENANCE, and Adjustment Safety Storage SafetyChildren Safety Parts & Features Product SpecificationsRefer to Engine Manual for Detailed Engine Specs Safety Decals How to Remove Tiller from Carton AssemblyAssembly Instructions Install the Wheels See FigureAttach Upper Handle See Figure Assembly Save all instructions Engine Oil Engine PreparationStart the Engine OperationTilling Mode Transport ModeDepth Regulator Lever See Figure Clutch Lever AdjustmentsTo increase belt tension Belt Tension Adjustment See FigureTo Decrease Belt Tension Tilling TipsPeriodic Maintenance Schedule Table MaintenanceService Records ServiceClean Tine Axle Shaft Engine MaintenanceChange Belts Check or Fill Engine CrankcaseHow to Prepare for Storage Technical ServiceProblem Possible Causes Solutions Powermate Rotary Tiller Limited Warranty WarrantyEmisson Control System Warranty Warranty Save all instructionsYour Warranty Rightes and Obligations Manufacturer’s Warranty CoverageHow to Obtain Warranty Service Warranty CoverageExclusions Limitations of LiabilitySystems Covered by this Warranty Parts Description WarrantyPage Manual de operación Motocultivadora rotativa con trenSímbolos de alerta sobre seguridad Definiciones de seguridadSímbolos de advertencia sobre seguridad Símbolos de control y operaciónResponsabilidad DEL Operador Información importante sobre seguridadSeguridad Durante LA Preparación Seguridad Durante LA OperaciónSeguridad Durante LA Operación Continuación Información importante sobre seguridad ContinuaciónSeguridad DEL Combustible Seguridad Durante LA REPARACIÓN, Mantenimiento Y Ajuste Seguridad DE AlmacenamientoSeguridad DE Niños Piezas y características Especificaciones del productoMarbetes de seguridad Cómo sacar la motocultivadora de la caja MontajeInstalar EL Regulador DE Profundidad Instalar LAS Ruedas véase la figuraMontaje Continuación Conserve todas las instrucciones Gratuitamente ALFigura 5b Cómo Revisar EL Nivel DE Aceite Y Llenar AL Nivel Apropiado Preparación del motorInspección prearranque OperaciónArrancar el motor Parar el motorVelocidad de operación Operación Continuación Conserve todas las instruccionesApagado Modo de transporte y modo de labranzaPalanca DEL Regulador DE Profundidad Palanca DEL Embrague véase la figuraPalanca del embrague AjustesPara aumentar la tensión de la correa Ajuste DE LA Tensión DE LA CorreaPara Reducir LA Tensión DE LA Correa Tabla DE Programa DE Mantenimiento Periódico MantenimientoPrograma de mantenimiento Cambiar LAS Correas Mantenimiento ContinuaciónRevisar O Llenar EL Cárter DEL Cigüeñal LubricaciónCómo preparar la motocultivadora para almacenamiento Servicio técnicoProblema CAUSA/S POSIBLE/S Solución / Soluciones Diagnóstico y resolución de problemasGarantía Garantía del sistema pro control de emisiones contaminantes Garantía Continuación Conserve todas las instruccionesDerechos y obligaciones al amparo de la garantía Cobertura de la garantía del fabricanteCómo obtener servicio de garantía Cobertura de la garantíaExclusiones Limitaciones de responsabilidadGarantía Continuación

P-FTT-160MD, P-FTT-160MD-[E] specifications

The Powermate P-FTT-160MD-[E],P-FTT-160MD is a high-performing, versatile inverter generator designed for both recreational and professional use. With a robust engineering focus, this generator provides optimal performance and reliability for a variety of applications, from powering tools on job sites to providing electricity during outdoor camping trips.

One of the standout features of the Powermate P-FTT-160MD is its impressive power output. It boasts a starting wattage of 1600 watts and a running wattage of 1400 watts, making it capable of handling multiple devices simultaneously. This power capacity makes it an excellent choice for running essential appliances, including refrigerators, lights, and power tools, ensuring that users can meet their energy needs with ease.

The generator utilizes advanced inverter technology, which creates clean and stable electricity that is safe for sensitive electronics. This is particularly important for those who need to power devices such as laptops, smartphones, and other gadgets, as the inverter technology minimizes the risk of damage caused by voltage fluctuations. The quiet operation is another advantage, with operating noise levels significantly lower than traditional generators, making it suitable for use in residential areas and quiet outdoor settings.

Portability is a key characteristic of the Powermate P-FTT-160MD. Weighing in at a manageable point, it features a convenient carry handle that makes transportation easy. This design element allows users to effortlessly take the generator to various locations, whether it be for camping trips, tailgating, or emergency power needs at home.

Efficiency is paramount, and the Powermate P-FTT-160MD is equipped with an eco-mode feature. This function adjusts the engine speed based on the load, optimizing fuel consumption and allowing for longer run times on a single tank of fuel. It also contributes to lower emissions, making it an environmentally friendly choice for those who prioritize sustainability.

Safety features are also integrated into the generator design, including overload protection and low oil shutdown, which prevent potential damage and enhance user safety.

In summary, the Powermate P-FTT-160MD-[E],P-FTT-160MD inverter generator excels in delivering reliable power, portability, and user-friendly features. Its combination of advanced technology, efficiency, and safety makes it a trusted option for users seeking dependable power solutions in a variety of environments.