Briggs & Stratton 01654, 01653, 01892, 01893 Electric Start, Before Starting the Engine

Page 7

Portable Generator

ELECTRIC START

Your unit may be equipped with electric start capability but can be started manually. If you choose not to use the electric start feature, you do not need to install the battery. If your unit does not have electric start, ignore this section.

BEFORE STARTING THE ENGINE

Add Engine Oil and Fuel

• Place generator on a level surface.

Check Battery / Attach Negative Battery Wire

The sealed battery on the generator is fully charged and pre–installed except for the negative (black) battery cable.

To install:

1.Cut off tie wrap securing loose end of negative (black) cable.

2.Remove nut and washer on negative battery terminal.

3.Slide negative battery cable over screw on negative terminal (Figure 3).

Figure 3 — Negative Battery Connection

 

Nut

 

Washer

Negative

 

battery

Screw

cable

 

Positive battery cable

4.Reattach washer and nut and tighten.

5.Verify that connections to battery and generator are tight and secure.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine manual for oil and fuel fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

•Refer to engine owner’s manual and follow oil and fuel recommendations and instructions.

NOTE: Check oil often during engine break–in. Refer to engine owner’s manual for recommendations.

NOTE: The generator assembly rotates on a prelubricated and sealed ball bearing that requires no additional lubrication for the life of the bearing.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 01653 3250W 01654 5500W 01892 5000W 01893 6000W Equipment Description Table of ContentsSafety Rules Hazard Symbols and MeaningsWhen Storing Fuel or Equipment with Fuel in Tank When Adding FuelWhen Operating Equipment When Transporting or Repairing EquipmentWhen Adjusting or Making Repairs to Your Generator Install Wheel KIT AssemblyInstall the 10 Wheel Kit as Follows Installing the Wheel Kit Install the 8 Wheel Kit as FollowsBefore Starting the Engine Check Battery / Attach Negative Battery WireTo install Electric StartBattery Charger Using the GeneratorOperating Generator Stopping the Engine Connecting Electrical LoadsReceptacles 120/240 Volt AC, 30 Amp, Locking ReceptacleVolt AC, 30 Amp Locking Receptacle Cold Weather OperationVolt AC, 20 Amp, Duplex Receptacles Example Power ManagementDont Overload Generator CapacityBattery Maintenance General Maintenance RecommendationsEngine Maintenance Generator MaintenanceGenerator Storage StorageEngine Storage Other Storage Tips Problem Cause Correction TroubleshootingLimited Warranty Règles DE Sécurité Symboles de Danger et MoyensTable DES Matières Description DE L ÉquipementLorsque Léquipement Fonctionne Lorsque Vous Ajoutez DU CarburantLorsque Vous Transportez OU Réparez Léquipement Lorsque Vous Réglez OU Réparez Votre Générateur Installez les roues de 25 cm 10 po comme suit figure Installe LA Roue LA TrousseAssemblage Installez les roues de 20 cm 8 po comme suit figure Ajouter de lhuile à moteur et du combustible InstallationDémarrage Électrique Avant LE Démarrage DU MoteurChargeur DE Batterie Utilisation DE LA GénératriceUtilisation DU Générateur Prise à Verrouillage de 120/240 Volts c.a., 30 Ampères Prises DE CourantBranchement des Charges Électriques Arrêt du MoteurPrise à Verrouillage de 120 Volts c.a., 30 Ampères Exploitation PAR Temps FroidVolts c.a., 20 Ampères Prise de Courant Double Exemple NE PAS Surchargez GénérateurCapacité Gestion de la ConsommationEntretien de la Batterie Recommandations Générales D’ENTRETIENEntretien du Moteur Entretien du GénérateurAutres Idées de Remisage RemisageRemisage du Générateur Remisage du MoteurDépannage Garantie Limitée Advertencia Tabla DE ContenidosDescripción DEL Equipo Instrucciones DE SeguridadCuando Transporte O Repare EL Equipo PeligroCuando Añada Combustible Cuando Opere EL EquipoCuando Ajuste O Haga Reparaciones a SU Generador PrecauciónInstale EL Juego DE Ruedas MontajeFigura 24 Instale el Juego de Ruedas Instale el 8 Juego de Ruedas Como Sigue FiguraPara instalar Arranque EléctricoAntes DE Darle Arranque AL Motor Agregar Aceite al Motor y GasolinaCargador DE Batería USO DEL GeneradorOperando EL Generador Precaución 120/240 Voltios AC, 30 Amp, Receptáculo de Seguridad ReceptáculosConexion De Cargas Electricas Parado Del MotorVolt AC, 20 Amp, Receptáculos Dobles Tomacorrientes de 120 Voltios AC, 30 AmperiosOperación Durante un Clima Frío Ejemplo No Sobrecargue GeneradorCapacidad Control de la EnergíaMantenimiento de la Batería Recomendaciones Generales DE MantenimientoMantenimiento del Motor Mantenimiento del GeneradorOtras Sugerencias Para el Almacenando AlmacenamientoAlmacenando el Generador Almacenando el MotorDiagnositicos DE Averías Problemo Accion CausaNotas Garantía Limitada

01654, 01653, 01892, 01893, 01653, 01653, 01654, 01892, 01893 specifications

Briggs & Stratton is a renowned name in the power equipment industry, particularly recognized for its reliable small engines used in various applications. The model numbers 01653, 01654, 01892, and 01893 represent a series of advanced engines that embody the innovation and quality synonymous with the Briggs & Stratton brand.

One of the main features of these models is their robust design, which ensures durability and longevity even under demanding conditions. Engineered for easy operation, these engines are ideal for both residential and commercial applications, such as lawn mowers, pressure washers, and generators.

The 01653 and 01654 models are equipped with overhead valve technology, providing enhanced fuel efficiency and reduced emissions. This allows users to operate their equipment more sustainably while still experiencing powerful performance. Additionally, both models feature a convenient recoil starter, making them easy to start with minimal effort.

Moving on to the 01892 and 01893 models, these engines incorporate advanced cooling systems designed to prevent overheating during extended use. This is particularly beneficial for users who rely on their equipment for long periods, as it enhances performance and reliability. The 01892 model also boasts a unique float feed carburetor system, which ensures consistent fuel delivery, optimizing engine performance regardless of the application's rigor.

All four models are designed with user-friendliness in mind. They come equipped with simple maintenance features, allowing users to perform routine checks and oil changes with ease. The easy-access air filters contribute to better engine performance and longevity while being straightforward to replace.

Furthermore, Briggs & Stratton engines are field-tested for their reliability and efficiency. Users can trust that every one of these models delivers consistent power and performance, which is critical for completing tasks efficiently.

In conclusion, the Briggs & Stratton 01653, 01654, 01892, and 01893 models stand out due to their advanced technologies, user-friendly features, and robust construction. They represent the company's commitment to providing dependable engines that meet the varied needs of professionals and homeowners alike. Whether for residential or commercial use, these models continue to set standards in the power equipment industry.
Top Page Image Contents