Briggs & Stratton 30235 operating instructions Connecting Electrical Loads, Stopping the Engine

Page 12

Connecting Electrical Loads

1.Let engine stabilize and warm up for a few minutes after starting.

2.Plug in and turn on the desired 120 and/or

240 Volt AC, single phase, 60 Hz electrical loads.

NOTE:

•DO NOT connect 240 Volt loads to the 120 Volt duplex receptacles.

•DO NOT connect 3-phase loads to the generator.

•DO NOT connect 50 Hz loads to the generator.

•DO NOT OVERLOAD THE GENERATOR. See Don’t Overload Generator.

NOTICE

Exceeding generators wattage/amperage capacity can damage generator and/or electrical devices connected to it.

•See Don’t Overload Generator.

•Start generator and let engine stabilize before connecting electrical loads.

•Connect electrical loads in OFF position, then turn ON for operation.

•Turn electrical loads OFF and disconnect from generator before stopping generator.

Stopping the Engine

1.Turn OFF and unplug all electrical loads from generator panel receptacles. NEVER start or stop engine with electrical devices plugged in and turned ON.

2.Let engine run at no-load for several minutes to stabilize internal temperatures of engine and generator.

3.Push engine rocker switch to “Off” position (Figure 9).

WARNING

Backfire, fire or engine damage could occur.

•DO NOT stop engine by moving choke lever to “Choke” position.

4. Move fuel valve to “Off” position (A) (Figure 7).

10BRIGGSandSTRATTON.com

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Watts Where to Find Us Revision Serial Number Engine Model Number Date PurchasedTable of Contents Safety Rules Hazard Symbols and MeaningsWhen adding or draining fuel When starting equipmentWhen operating equipment When transporting or repairing equipmentAssembly Shipment ContentsInstall Wheel Kit Equipment DescriptionWhen adding fuel Add Engine OilAdd Fuel Fuel must meet these requirementsConnecting to a Building’s Electrical System System GroundGenerator Location Special RequirementsFeatures and Controls Receptacles Nema L14-30Generator Adapter Cord Set 120/240 Volt AC, 30 Amp, Locking ReceptacleOperation Starting the EngineConnecting Electrical Loads Stopping the EnginePower Management Don’t Overload GeneratorCapacity ExampleMaintenance Maintenance ScheduleGeneral Recommendations Emissions ControlGenerator Maintenance CleaningOil Oil RecommendationsChecking Oil Level Adding Engine OilChanging Engine Oil Service Air Cleaner Service Spark PlugClean Spark Arrester Screen Carburetor Adjustment Clean and inspect the spark arrester as followsEngine Air Cooling System Check Valve ClearanceStorage Troubleshooting Specifications Replacement PartsMaintenance Items Engine Technical InformationOwner’s Warranty Responsibilities Warranted PartsLength of Coverage Maintenance Consequential Coverage No ChargeClaims and Coverage Exclusions Warranty Period This page reserved Dónde encontrarnos Resolución de problemas Especificaciones Garantías Reglas de seguridadMontaje Controles y característicasNormas de seguridad Símbolos de peligro y sus significadosCuando anada combustible o vacíe el depósito Cuando ponga en funcionamiento el equipoCuando opere el equipo Cuando transporte o repare el equipoMontaje Descripción del equipoDesembalaje del generador Contenido de la cajaAgregar aceite al motor Agregue combustibleCuando anada combustible Gran altitudTierra del sistema Conexión al sistema eléctrico de un edificioUbicación del generador Requisitos EspecialesControles y características del generador Tomas eléctricas Tomas eléctricas dobles de 120 V CA y 20 aDispositivo de seguridad de 120/240 V, 30 a Juego de cables del adaptador del generadorOperando Encienda el motorConexión de cargas eléctricas Parada del motorNo sobrecargar el generador CapacidadEjemplo Control de la energíaMantenimiento Plan de mantenimientoRecomendaciones Generales Control de emisionesMantenimiento del Generador LimpiezaAceite Recomendaciones sobre el aceiteComprobación del Nivel de Aceite Adición de Aceite del MotorCambio de Aceite del Motor Servicio del depurador de aire Servicio del bujíaLimpie la Pantalla Apagachispas Sistema de refrigeración de aire Comprobación de holgura de la válvulaAjuste del Carburador Limpie e inspeccione el apagachispas de la siguiente maneraAlmacenamiento Resolución de problemas Problemo Causa AccionInformación Técnica Sobre el Motor Potencia NominalEspecificaciones del Generador Especificaciones del MotorResponsabilidades de la garantía del propietario Piezas garantizadasDuración de la cobertura Servicio gratuito Solicitudes y exclusiones de coberturaMantenimiento Cobertura de daños derivadosPeríodo DE Garantía

30235 specifications

The Briggs & Stratton 30235 is a powerful and efficient portable generator designed to provide reliable backup power. Ideal for homeowners and recreational users alike, this model boasts a range of features and technologies that enhance its performance and usability.

One of the standout features of the Briggs & Stratton 30235 is its 306cc engine, which delivers 7,000 starting watts and 5,500 running watts. This robust power output ensures that essential appliances, tools, and devices can be effectively supported during power outages or when on outdoor adventures. The generator is equipped with a durable 4-gallon metal fuel tank, providing up to 13 hours of run time at 50% load, which means users can count on extended operation without frequent refueling.

The generator employs a reliable and user-friendly design, featuring an easy-to-read LED display that provides important information such as power output and operational status. Additionally, it includes an automatic low oil shutdown feature, which protects the engine from damage by shutting down the unit when oil levels are too low. This functionality not only prolongs the life of the generator but also assists users in maintaining optimal performance.

For enhanced portability, the Briggs & Stratton 30235 comes with a built-in handle and never-flat wheels, making it easy to transport and position wherever needed. Its compact footprint allows it to be stored without taking up excessive space, making it an ideal choice for those with limited storage options.

The generator also features multiple outlets, including 120V 20A NEMA 5-20R duplex receptacles and a 120/240V 30A L14-30R lockable receptacle. This versatility allows users to connect a variety of devices and appliances, enhancing its usability for different applications, from home backup to camping trips.

In terms of safety, the Briggs & Stratton 30235 includes circuit protection to prevent overloading, ensuring that connected devices are protected. Moreover, it runs quietly compared to many other generators in its class, making it suitable for use in residential areas without causing a disturbance.

Overall, the Briggs & Stratton 30235 combines power, portability, and practicality, making it a top choice for those in need of reliable backup power or portable energy solutions. With its thoughtful design and advanced features, this generator stands out as a dependable companion for any situation that requires consistent electrical support.
Top Page Image Contents