■When turning off the projector, the cooling fan runs to decrease the internal temperature for a while. Unplug the power cord after the cool- ing fan stops. The period the cooling fan runs will vary, depending on the circumstances and the internal temperature.
Caution regarding usage of the projector
■When using the projector, be sure not to sub- ject it to hard impact and/or vibration, as this can result in damage. Take extra care with the lens. Before moving the projector, be sure to unplug the power cord from the wall outlet, and disconnect any other cables connected to it.
■Do not carry the projector by holding the lens.
■When storing the projector,
■Do not expose the projector to direct sunlight or place next to heat sources. Doing so may affect the cabinet color or cause deformation of the plastic cover.
Other connected equipment
■When connecting a computer or other audio- visual equipment to the projector, make the connections AFTER unplugging the power cord of the projector from the AC outlet and turning off the equipment to be connected.
■Please read the owner’s manuals of the pro- jector and the equipment to be connected for instructions on how to make the connections.
Using the projector in other countries
■The power supply voltage and the shape of the plug may vary depending on the region or country you are using the projector in. When using the projector overseas, be sure to use an appropriate power cord for the coun- try you are in.
Temperature monitor function
■If the projector starts to overheat due to setup
problems or blockage of the air vents, “ 
” and
“ 
” will illuminate in the lower left corner of the picture. If the temperature continues to
rise, the lamp will turn off, the temperature warn- ing indicator on the projector will blink, and after a
Info
•The cooling fan regulates the internal tem- perature, and its performance is automatically controlled. The sound of the fan may change during projector operation due to changes in the fan speed. This does not indicate malfunc- tion.
•Do not unplug the power cord during projec- tion or cooling fan operation. This can cause damage due to rise in internal temperature, as the cooling fan also stops.
9