Eiki EIP-1000T owner manual Adjusting the Projector Function PRJ ADJ menu

Adjusting the Projector Function (“PRJ - ADJ” menu)

Menu operation n Page 39

Picture		SCR - ADJ		PRJ - ADJ	Help
Auto Search				Off
Auto Sync				On
Auto Power Off				On
System Sound				Off
Speaker				On
RS-232C				9600 bps
Fan Mode				Normal
	Lamp Timer(Life)			0 h	100%
SEL./ADJ.			ENTER		END

*Serviceman only

1Auto Search Function

This function automatically searches for and switches to the input mode in which signals are being received, when the projector is turned on, or when the INPUT button is pressed.

Note

When “Auto Search” is set to “On”

•If two or more input signals are found, the pro- jector selects the input source in the order of INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4 when you press INPUT (P/R) on the projec- tor.

•While “Auto Search” is set to “On”, press CINPUT 1,CINPUT 2, DINPUT 3 or EINPUT 4 on the remote control to select an input mode other than the input mode se- lected by the projector.

2Auto Sync (Auto Sync Adjustment)

Selectable items	Description
On	Auto Sync adjustment will
	occur when the projector is
	turned on or when the input
	signals are switched, when
	connected to a computer.
Off	Auto Sync adjustment is not
	automatically performed.

Note

•Auto Sync adjustment is also performed by pressing F AUTO SYNC on the remote con- trol.

•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual ad- justments. (See page 46.)

44