Eiki EIP-1000T owner manual 2Adjusting the Image, Menu operation n

Picture Adjustment (“Picture” menu) (Continued)

Menu operation n Page 39

2Adjusting the Image

Adjustment	O button	Q button
Items
Contrast	For less	For more
	contrast.	contrast.
Bright	For less	For more
	brightness.	brightness.
Color*1	For less color	For more color
	intensity.	intensity.
Tint*1 *2	For making skin	For making skin
	tones purplish.	tones greenish.
Sharp*1	For less	For more
	sharpness.	sharpness.
Red	For weaker red.	For stronger red.
Blue	For weaker	For stronger
	blue.	blue.
Bright Boost	For high fidelity	For more
	color reproduc-	vividness.
	tion.

*1 Not displayed in the RGB input mode.

*2 “Tone” will appear on the menu screen only when PAL or SECAM signals are input (including when forcibly changed to those input signals). There is basically no need to adjust “Tone”, but you can adjust the picture tone with this adjustment when inputting PAL or SECAM signals .

Note

•To reset all adjustment items, select “Reset” and press hENTER.

4Progressive

Selectable	Description
items
2D	Useful to display fast-moving images
Progressive	such as sports.
3D	Useful to display relatively slow-
Progressive	moving images such as drama and
	documentary more clearly.
Film Mode	Reproduces the image of film source*
	clearly. Displays the optimized image of
	film transformed with three-two pull down
	(NTSC and PAL60Hz) or two-two pull
	down (PAL50Hz and SECAM) enhance-
	ment to progressive mode images.

*The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progres- sive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image.

Note

•In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been entered.

•When the image is blurred or noisy, switch to the optimal mode.

•When using progressive inputs, inputs are di- rectly displayed so that 2D Progressive, 3D Progressive and Film Mode cannot be se- lected.

3Adjusting the Color Temperature

Selectable		Description
items
5500K	For lower color temperature for
6500K	warmer, reddish incandescent-like
7500K	images.	P
8500K		R
9300K
	For higher color temperature for
10500K
	cooler, bluish, fluorescent-like images.

Note

•Values on “CLR Temp” are only for general standard purposes.

5Lamp Setting

Select-			Power
	Bright-	Fan	consumption
able				Lamp Life
	ness	sound	(When using
items
			AC 100V)
Eco +	Approx.	Low	305W	Approx.
Quiet	87%			3,000
				hours
	100%	Normal	350W	Approx.
Bright				2,000
				hours

Note

•When “Lamp Setting” is set to “Eco+Quiet”, the power consumption will decrease and the lamp life will extend. (Projection brightness decreases approximately 13%.)

42