Eiki EIP-1000T owner manual 3Auto Power Off Function, This function changes the fan rotation speed

3Auto Power Off

	Function
Selectable		Description
	items
On		When no input signal is detected for
		more than 15 minutes, the projector will
		automatically enter standby mode.
Off		The Auto Power Off function will be
		disabled.

Note

•When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

4Setting the Confirmation Sound (System Sound)

Selectable	Description
items
On	A confirmation sound is made when
	the projector turns on/off.
Off	No confirmation sound is made.

Menu operation n Page 39

6Fan Mode Setting

This function changes the fan rotation speed.

Selectable	Description
items
Normal	Suitable for normal environments.
High	Select this when using the projector at
	altitudes of approximately 4,900 feet
	(1,500 meters) or more.

When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.

7Checking the Lamp Life Status

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Lamp usage condition		Remaining lamp life
	“Life”	100%	5%
Operated exclusively		Approx.	Approx.
with Lamp Setting set to		3,000	150 hours
“Eco + Quiet”		hours
Operated exclusively		Approx.	Approx.
with Lamp Setting set to		2,000	100 hours
“Bright”		hours

5Speaker Setting

Selectable	Description
items
On	The audio signal is output from the
	internal speaker.
Off	The audio signal is not output from the
	internal speaker.

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

•The lamp life may vary depending on the us- age condition.

45