Eiki EIP-1000T owner manual Part Names and Functions, Rear View, Intake vent AC socket Connect

Part Names and Functions (Continued)

Numbers in Z refer to the main pages in this owner’s manual where the topic is explained.

Rear View

Intake vent	47
AC socket	28
Connect the
supplied Power cord.
Rear adjustment	31
foot
Terminals 1	2 3	4	5

6 7 8

47Exhaust vent

45 Speaker

Kensington Security

Standard connector

Using the Kensington Lock

•This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector.

Terminal	Description	Page
	INPUT 1, 2 terminal
	■ Connecting video equipment with component output terminal	23

1(DVD player, DTV decoder, DVD recorder with hard disc, etc.).

	■ Connecting the computer.		25
2	AUDIO (INPUT 1, 2) terminal		23 25
	Connecting an audio cable (Shared audio input terminal for INPUT 1 and 2).
	OUTPUT (INPUT 1, 2) terminal
3	Connecting the monitor when you want to simultaneously watch the		26
	projection image on the monitor. (Shared computer RGB and
	component signals output terminal for INPUT 1 and 2).
	INPUT 3 terminal		24
4	Connecting video equipment with S-video output terminal (VCR, DVD
	player, etc.).
5	RS-232C terminal	Serviceman only	–
	Use the DIN-D-sub RS-232C adaptor (supplied) to connect to the
	RS-232C port of the computer.
	AUDIO OUTPUT terminal		27
6	Connecting to an amplifier or other audio equipment with an audio cable
	(commercially available) (Shared audio output terminal for INPUT 1, 2, 3 and 4).
7	INPUT 4 terminal		24
	Connecting video equipment without S-video output terminal.
8	AUDIO (INPUT 3, 4) terminal		24
	Connecting an audio cable (Shared audio input terminal for INPUT 3 and 4).

12