Eiki EIP-1000T Adjusting the Volume, Screen and turn off the sound, AV Mute button Volume buttons

Image Projection (Continued)

Adjusting the Volume

Press K/L on the remote control or

–O/Q+ on the projector to adjust the vol- ume.

Note

• Pressing K/–Owill lower the volume.

• Pressing L/Q+ will raise the volume.

• When the projector is connected to external equipment, the volume level of the external equipment changes in accordance with the volume level of the projector. Set the projector’s volume to the lowest level when turning the projector on/off or changing the input signal.

• When you do not want to output the sound from
the projector’s speaker while the projector is	On-screen Display
connected to external equipment, set
“Speaker” in “PRJ-ADJ” menu to “Off”. (See
page 45.)

Displaying the Black Screen and Turning off the Sound Temporarily

Press MAV MUTE on the remote con-

trol to temporarily display a black	On-screen Display
screen and turn off the sound.

Note

•Pressing MAV MUTE again will turn the projected image back on.

AV MUTE button

Volume buttons

32