Cooper Lighting Radio manual Operating Guidelines, Selecting a channel, switching on or OFF

Page 7

WR 3M

Page 7 of 21

−LED lit green constantly indicates that the connected tool is being heated up.

−LED flashing green indicates that the Set temperature of the tool has been reached.

Active channels are indicated in the display with a triangle “S”(22) and a lightning symbol " “ (21).

6 Operating Guidelines

6.1Selecting a channel, switching ON or OFF

1.Depress one of the Radio Buttons ┌ 1 ┐, ┌ 2 ┐ or ┌ 3 ┐ to select one of the three channels until the desired channel is displayed.

-Or -

Depress the center ┌ 1·2·3 ┐ Radio Button until the desired channel is displayed.

The display shows the Set temperature of the selected channel and - in smaller script - the fixed/pre-set temperatures.

The current tool temperature then appears in the display. The status with the corresponding Set temperature is also displayed in the lower area.

The selected channel is indicated by a triangle (22) in the display and by a red-illuminated LED (1) on the device connection port.

2. To turn the selected channel OFF or ON, depress the UP and DOWN Scroll Keys simultaneously until three dashes "- - -" appear in the display. Immediately release Scroll Keys. If "- 1 -" appears in the screen, press the ┌ 3 ┐ Radio Button to exit the menu and repeat step #2.

3.If the channel is deactivated, "OFF“ appears in the display. If the channel is activated, the current Read temperature appears in the display.

Stored data is not lost when a channel is switched “OFF”.

Note

The display switches automatically when:

 

•

a Tool is connected

 

•

when the finger switch is depressed

 

•

when a Tool is removed from the Switching Stand

6.2Setting the Temperature

Setting the Temperature Individually

1. Select the desired channel by depressing one of the Radio Buttons ┌ 1 ┐, ┌ 2 ┐ or ┌ 3 ┐.

Or, depress the center Radio Button ┌ 1·2·3 ┐ until the desired channel is displayed.

The display shows the Read temperature values of the selected channel.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Receptacle 1 , 2 Buttons 1 , 2Button 1·2·3 AirInstructions Table of ContentsPacking List Safety InformationDescription DXV 80 WR3000M Tools and HoldersWP 80 WR3000M USB Port WR 3M Technical DataConnected to the air port Initial Set-upSetting the Temperature Selecting a channel, switching on or OFFOperating Guidelines Setting the Pre-set Temperature on Radio Buttons 1 , 2 or Setting the Air FlowTemperature Setting using the Radio Buttons 1 , 2 or Selecting Menu 1 Special Functions Switching the Vacuum Pick-up Pump ON/OFFSpecial Functions Soldering and DesolderingSoldering / desoldering tool is not in use Setting the Standby TemperaturePossibility of manual temperature reduction Setback when Setback TimeOFF functions Setting the Automatic Switch-Off Time AUTO-OFFSettings Tool Operation without Switching Holder Tool Operation with Switching HolderSwitching the Temperature Display Setting the Window FunctionLimiting the Time HAP on time for Hot-Air Pencil Depressing the Radio buttons 1 or 2 while OFF is displayed Setting the Vacuum OFF delay VAC OFFSetting the Vacuum on delay VAC on Switching the Lock Function On/OffSpecial Functions Navigation Resetting the Special Functions to Factory Default SettingsSetting the Station Identification Remote ID code Selecting Menu 2 Special FunctionsDepress Radio Button 3 to exit the menu item without saving Changes ExitFactory Control Check FCC Control Check at 212 F / 100 CMaintaining and Servicing the WR 3M Setting the Pick-Up Vacuum LevelChanging the Filter Indication/symptom Possible cause Corrective Action Fault Indications and CorrectionAccessories Disposal WarrantyWR 3M XX XXX XX / 03.07 2007 Cooper Industries
Top Page Image Contents