Cooper Lighting Radio manual Buttons 1 , 2, Button 1·2·3, Air, Receptacle 1 , 2

Page 1

WR 3M - Operating Instructions

1 of 21

Device Overview

1 Channel Selection LED

Indicator

2 Heater Power LED Indicator

3 Vacuum “On” LED

4 LCD Display

5 UP Scroll Key

6 DOWN Scroll Key

7 Channel Selection Radio

Buttons ┌ 1 ┐,┌ 2 ┐,┌ 3 ┐

8 Start/Stop Pick-Up Radio

Button

9 Status Display LED Pick-Up

10 Channel Selection Radio

Button ┌ 1·2·3 ┐

11 Hot-Air Setting Radio Button

(Air)

12 Power Switch

13 Pick-up Connections,

14 Vacuum Connection, (Vac)

15 Hot Air Connection, (Air)

16 Receptacle ┌ 1 ┐,┌ 2 ┐,┌ 3 ┐

17 Temperature Display

18 Temperature Symbol

19 Time Functions

20 Lock

21 Heater Control Indicator

22 Display, Channel Selection

23 Display, Fixed/Pre-Set temperature

24 Display, Special Functions

25 USB port

26 Fuse

27 120 VAC Power Connection

28 N/A (US Versions)

Image 1

Contents Button 1·2·3 Buttons 1 , 2Air Receptacle 1 , 2Instructions Table of ContentsPacking List Safety InformationDescription DXV 80 WR3000M Tools and HoldersWP 80 WR3000M USB Port WR 3M Technical DataConnected to the air port Initial Set-upSetting the Temperature Selecting a channel, switching on or OFFOperating Guidelines Setting the Pre-set Temperature on Radio Buttons 1 , 2 or Setting the Air FlowTemperature Setting using the Radio Buttons 1 , 2 or Special Functions Switching the Vacuum Pick-up Pump ON/OFFSoldering and Desoldering Selecting Menu 1 Special FunctionsPossibility of manual temperature reduction Setback when Setting the Standby TemperatureSetback Time Soldering / desoldering tool is not in useSettings Tool Operation without Switching Holder Setting the Automatic Switch-Off Time AUTO-OFFTool Operation with Switching Holder OFF functionsSwitching the Temperature Display Setting the Window FunctionLimiting the Time HAP on time for Hot-Air Pencil Setting the Vacuum on delay VAC on Setting the Vacuum OFF delay VAC OFFSwitching the Lock Function On/Off Depressing the Radio buttons 1 or 2 while OFF is displayedSetting the Station Identification Remote ID code Resetting the Special Functions to Factory Default SettingsSelecting Menu 2 Special Functions Special Functions NavigationFactory Control Check FCC Changes ExitControl Check at 212 F / 100 C Depress Radio Button 3 to exit the menu item without savingMaintaining and Servicing the WR 3M Setting the Pick-Up Vacuum LevelChanging the Filter Indication/symptom Possible cause Corrective Action Fault Indications and CorrectionAccessories Disposal WarrantyWR 3M XX XXX XX / 03.07 2007 Cooper Industries