Cooper Lighting Radio manual Setting the Automatic Switch-Off Time AUTO-OFF, OFF functions

WR 3M					Page 11 of 21
					Setting the Automatic “Switch-Off” Time (AUTO-OFF)
					When the soldering tool is not in use, heating of the soldering tool is
					switched off after the AUTO-OFF time has elapsed. The Auto-Off can
					be set from 0-999 minutes for each channel independently. With a
					setting of "0 min", the Auto Off function is disabled. Auto Off is carried
					out independently of the Setback function. The “Read” temperature is
					displayed (flashing) and may be monitored as a decreasing heat
					indicator; "OFF" appears in the display in small script above the
					selected channel. Below 122°F ( 50°C ), a flashing dash appears in
					the center of the display.
					The following AUTO-OFF time settings are possible:
					− "0 min“: AUTO-OFF function is switched off
					− "1-999 min“: AUTO-OFF time, each channel individually selectable
					1. Select the menu item OFF in Menu 1.
					2. Set the AUTO-OFF Set time with the UP or DOWN Scroll Key.
					3. Proceed to the next menu item with the Radio Button ┌ 1 ┐ (back)
					or ┌ 2 ┐ (forward) or exit the menu with Radio button ┌ 3 ┐ (EXIT).
					Tool Operation with different settings of the SETBACK and AUTO
					OFF functions
		Settings			Tool Operation without Switching Holder
	SETBACK			OFF Time [1-
	Time [1-99			999 min]
	min]
0			0		Soldering tool remains at the Set soldering temperature.
	ON
0				Time	Soldering tool is switched off when not in use1) after the OFF time
	ON				has elapsed.
	Time		0		Soldering tool is controlled down when not in use1) to the STANDBY
					temperature2) after the SETBACK time has elapsed.
					Soldering tool is controlled down when not in use1) to the STANDBY
	Time			Time	temperature2) after the SETBACK time has elapsed and is switched
					off after the OFF time has elapsed.
					Tool Operation with Switching Holder
0				0	Soldering is switched off in the holder3).
	ON			0	Soldering tool is controlled to the STANDBY temperature2) when in
					the holder3) .
0				Time	Soldering tool is switched off after the OFF time has elapsed when
					in the holder3).
	ON			Time	Soldering tool is controlled to the STANDBY temperature2) and is
					switched off after the OFF time has elapsed when in the holder3).
	Time			0	Soldering tool is controlled to the STANDBY temperature2) after the
					SETBACK time has elapsed when in the holder3).
	Time			Time	Soldering tool is controlled to the STANDBY temperature2) after the
					SETBACK time has elapsed and is switched off after the OFF time
					has elapsed when in the holder3).