Cooper Lighting Radio manual Packing List, Description, Safety Information

Page 3

WR 3M

Page 3 of 21

Safety Information:

z Always place the soldering iron in its original holder

zRemove all inflammable objects from the proximity of the hot soldering tool.

zUse suitable protective clothing to prevent the risk of burns associated with molten solder.

zNever leave a hot soldering iron unattended.

zNever work on electrically live circuits or components.

zAlways wear eye protection when working with soldering and desoldering applications.

The Weller WR 3M microprocessor-controlled Rework Station corresponds to the EC Declaration of Conformity in accordance with the basic safety requirements of Directives 89/336/EEC and 73/23EEC.

3 Packing List

−WR 3M Rework Station

−Power cord

−Air-hose adapter for Hot-Air pencil (HAP 1)

−HAP 200 Hot Air Pencil ( WR3000M only )

−WDH 30 Tool Holder ( WR3000M only )

−WP80 Soldering Iron ( WR3000M only )

−WDH 10 Tool Holder ( WR3000M only )

−DXV 80 Desoldering Iron ( WR3000M only )

−WDH 40 Tool Holder ( WR3000M only )

−WR 3M Operating Instructions

−Safety information booklet

−CD with USB software (“Firmware Updater” and “Monitor Software”)

−USB cable

−Packing with colored tool markers

4 Description

The Weller WR 3M is a versatile Rework System for making professional repairs to current technology electronic assemblies in the industrial production and engineering sectors. The WR 3M has 3 independent channels for operating 3 tools simultaneously.

Fast and precise sensor sampling in the closed loop control provides temperature accuracy and maximum temperature control under load. All tools are recognized automatically by the WR3M and the appropriate control parameters are set.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Receptacle 1 , 2 Buttons 1 , 2Button 1·2·3 AirInstructions Table of ContentsSafety Information Packing ListDescription Tools and Holders DXV 80 WR3000MWP 80 WR3000M USB Port WR 3M Technical DataConnected to the air port Initial Set-upSelecting a channel, switching on or OFF Setting the TemperatureOperating Guidelines Setting the Air Flow Setting the Pre-set Temperature on Radio Buttons 1 , 2 orTemperature Setting using the Radio Buttons 1 , 2 or Selecting Menu 1 Special Functions Switching the Vacuum Pick-up Pump ON/OFFSpecial Functions Soldering and DesolderingSoldering / desoldering tool is not in use Setting the Standby TemperaturePossibility of manual temperature reduction Setback when Setback TimeOFF functions Setting the Automatic Switch-Off Time AUTO-OFFSettings Tool Operation without Switching Holder Tool Operation with Switching HolderSetting the Window Function Switching the Temperature DisplayLimiting the Time HAP on time for Hot-Air Pencil Depressing the Radio buttons 1 or 2 while OFF is displayed Setting the Vacuum OFF delay VAC OFFSetting the Vacuum on delay VAC on Switching the Lock Function On/OffSpecial Functions Navigation Resetting the Special Functions to Factory Default SettingsSetting the Station Identification Remote ID code Selecting Menu 2 Special FunctionsDepress Radio Button 3 to exit the menu item without saving Changes ExitFactory Control Check FCC Control Check at 212 F / 100 CSetting the Pick-Up Vacuum Level Maintaining and Servicing the WR 3MChanging the Filter Indication/symptom Possible cause Corrective Action Fault Indications and CorrectionAccessories Disposal WarrantyWR 3M XX XXX XX / 03.07 2007 Cooper Industries
Top Page Image Contents