Sanyo XG-705A owner manual Wireless LAN Configurations, Attaching the USB Wireless LAN Adapter

Page 34

5. Wireless LAN Configurations

Attaching the USB Wireless LAN Adapter

Insert the USB Wireless LAN Adapter into the USB terminal of the projector. Inserting the adapter after verifying the shape of the connector in order not to break the terminal.

CAUTION: Use specified USB Wireless LAN Adapter. If you use other product, the projector will not be operated properly.

USB Terminal

USB

USB Lamp

After the USB Wireless LAN Adapter becomes ready for use, the lamp will start to blink green when receiving data.

USB Wireless LAN Adapter

Setting the Network Environment

Set the Wireless LAN network through the projector menu.

Detailed network settings will be made with browser. Refer to “6. Configurations with Browser”. (p39–54) Complete the settings described in this chapter before performing the steps in “6 Configurations with Browser.”

Setting Procedures

With Easy setting, you can make Wireless LAN settings easily without any complicating settings (p.36).

1.Turn on the projector and select “Wireless” from the input menu of the projector. The Network connection standby display will appear and the “Please wait...” message will be displayed. Refer to “3. Names and Functions of the Operation Screen” ➔ “Network Connection Standby Display” (p.20).

After short time, the message changes to “ Ready for use”. If the USB Wireless LAN Adapter is not attached to the projector, “Wireless” cannot be selected.

2.Select “Wireless Setting” from the projector menu and press the SELECT button.

Select similar environment between LAN 4 and LAN 5 with the Point 7 8 buttons. (LAN 4, LAN 5, and SIMPLE* are factory default settings. Select similar environment to the installation location. For each settings, refer to the chart on page 38.)

✳“SIMPLE” mode is used for simple setting without complicated LAN setting procedures to connect to the Wireless LAN. See “Easy Setting” (pp.36–37) for details.

34

Image 34

Contents Network Set-up Operation Compliance Federal Communication Commission NoticeSafety Instructions Trademarks and CopyrightTable of Contents Moderator Function Advanced SetupRestart TerminologyOperating Environment and Configuration Required Operating Environment for ComputersNetwork Specifications of the Projector Differs according to the operating environmentPage Chapter About LAN FunctionsImage Projecting System via LAN LAN Functions and the FeaturesAbout LAN Functions Flow of Image TransferAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Install the software on computers Setup ProceduresNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Names and Functions of the Operation Screen Network Connection Standby DisplayNetworkModule Client Parts Names and Functions of the ScreenAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Network Environment Settings Wired LAN ConfigurationsConnecting to the LAN Line Setting ProcedureWired LAN Configurations Confirming the Operation Wired LAN Configurations Wired Factory Default See the menu above User PIN CodeFactory Default Setting of the Wired LAN DNS Domain System Blank Password User PIN CodePage Wireless LAN Configurations Setting the Network Environment Wireless LAN ConfigurationsAttaching the USB Wireless LAN Adapter Setting ProceduresWireless LAN Configurations Easy Setting Wireless Factory Default Wireless InformationComputer environment and Wireless LAN connection Wireless LAN Factory Default Settings Leap User Blank PasswordConfigurations with Browser Operation of Network ViewerIntroduction Configurations with BrowserBrowser Configuration Browser EnvironmentStarting up the Browser Screen of Wireless LAN Screen of Wired LAN InformationParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Wireless Setting PasswordMail Reaches in ***hours up to ASCII220 charactersAdmin Password Have entered is displayed as up to ASCII32 charactersUser PIN code Moderator Login Password Figure will be displayed as . The password consistsMiscellaneous Change Configuration Set Wireless LAN set menu Wired LAN set menuRestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Use the Moderator Function Moderator FunctionPreparation for Using the Moderator Function Preparation Procedure for Using the Moderator FunctionSetting the Moderator Function Registration of the ModeratorRegistration of the Clients Participants Project the Client’s Images How to Use the Moderator FunctionUnregister from Moderator Status Stop Projecting the Client’s ImagesHow to Use Network Viewer Wireless LAN Infrastructure Communication Mode How to Use Network ViewerMechanism of NetworkViewer and the Flow of the Signal Wireless LAN AdHoc Communication ModeOperation Wired LAN Communication ModeFunctional Conditions of FTP Server Which Provides Images Projecting the Image Operating with the PJ ControllerSpecify the FTP server to provide image data Operating with the Browser Refresh Wireless LAN Operating with the projectorSet timing to switch images in Auto play mode 3-240 sec Page How to Use the PJ Controller How to Use the PJ Controller How to OperateInitial Settings Mail Setting Registering E-mail AddressCheck Option items Enter the message to attach the E-mailPower & Status Turning on/off the projectorCheck the status of the projector Control InputPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Service Confirm the actual adjustmentSave the setting Set Select Set Number and name the settingLoading the Set Multi Control Select projector input Appendix Appendix TroubleshootingWireless LAN Connection cannot be established Computer cannot connect projectorsWEP Network Viewer does not work with the projector operation Cannot start up the browserProjector/PJ Controller cannot be turned on/off Speed of playing back images are very slowTerminology Setting up the IP address with arp + pingcommand Configuring WEP security with the projector Appendix KW6AC