Sanyo XG-705A owner manual Wep

11. Appendix

Infrastructure Mode:

When selecting LAN5 (factory default setting)

Check each item below in the Wireless Setting menu of the projector as follows:

*IP Address	No setting is required.
*Sub net	Should be same as the setting of the access point
*Gateway	Should be same as the setting of the access point
*Network Type	Should be the Infrastructure mode
*ESSID/SSID/IBSSID....	Should be same as the setting of the access point
Check the settings for projector Client computer
*IP Address	No setting is required. Automatically set as HDCP.
*Wireless Channel	Should be 11
*ESSID/SSID/IBSSID....	Is same as the setting of the access point?
*WEP	Should be disabled.
	->To enable the function, set the WEP by the browser after the

connection is established. (Refer to “6. Configurations with Browser” on page 47.)

*When using LAN5, it is necessary DHCP/BOOTP server is under the environment enabling those servers communicate through networks. Some access points may have the DHCP function. For detail of the settings, refer to the owner’s manual for the devices or consult a system administrator of the network.

Is the segment where the projector is installed different from the computer?

Specify IP Address directly on the optional setting. Refer to “4. Wired LAN Configurations” ➔

“Confirming the Operation” (p28–29).

■Connection between computer and the projector via Wired LAN cannot be

established.

When selecting LAN1 (factory default setting)

Check IP address, Sub net and Gateway of the projector and computer. For further details of the configuration, contact your system administrator.

Is the segment where the projector is installed different from the projector?

Specify IP Address directly on the optional setting. Refer to “4. Wired LAN Configurations” ➔ “Confirming the Operation” (pp.28–29).

About Settings for LAN Environment:

When setting LAN4 or LAN5, first, connect to the projector with easy settings and set with the browser. Or connect client computer to the projector in accordance with the factory default settings. Make detailed settings by the browser and then restore the computer for previous environment setting.

93