Sanyo XG-705A owner manual Tcp / Ip

Page 46

6. Configurations with Browser

Advanced Setup (Click “+” mark to display the subitems.)

TCP / IP

TCI/IP related items can be configured on this screen.

46

Parameter	Description
IP Configuration Method	........A desired IP address setup method is selected from “Manual”,
	“DHCP”, and “BOOTP”.
	If “DHCP” or “BOOTP” is selected, the IP address is obtained
	automatically as “DHCP client” or “BOOTP client”. At this time, it is
	necessary that the DHCP server/BOOTP server must be in the
	environment allowing the network communication.
	IP Address, Subnet Mask, and Gateway Address fields will be displayed
	“-.-.-.-”, when the IP Address Configuration Method is set to DHCP or
	BOOTP and failed to get the figures from the DHCP server, the
	computer cannot be connected to the projector.
	If the projector fails to obtain IP address from BOOTP server, the
	existing IP address will be assigned.
IP Address	Set the IP address in the environment you wish to use. If “IP configuration
	Method” is set to “DHCP” or “BOOTP”, this setting is not needed.
Subnet Mask	Set the Subnet mask in the environment you wish to use. If “IP
	Configuration Method” is set to “DHCP” or “BOOTP”, this setting may
	become unnecessary depending on the settings of “DHCP Server” and
	“BOOTP Server”.
Gateway Address	Set the gateway address in the environment you wish to use.
	If “IP Configuration Method” is set at “DHCP” or “BOOTP”, this
	setting may become unnecessary depending on the settings of “DHCP
	Server” and “BOOTP Server”. If any segment beyond the router is not
	used, the gateway address can be remained "255.255.255.255".
ARP+PING	Select “Enable” or “Disable” the IP address setup using "arp" and "ping"
	(Refer to page 96 for details.)
Domain	Enter the domain name where the projector belongs to (up to ASCII 254
	characters).
DNS Server	Enter the address of the DNS server.
APPLY button	Click the APPLY button to update. The screen to restart the projector will be
	displayed.
REFRESH button	Update and show the adjusted data.
RESTORE Factory Default
Settings button	..........Restore the settings to the values at the factory.

Image 46

Contents Network Set-up Operation Compliance Federal Communication Commission NoticeSafety Instructions Trademarks and CopyrightTable of Contents Moderator Function Advanced SetupRestart TerminologyOperating Environment and Configuration Required Operating Environment for ComputersNetwork Specifications of the Projector Differs according to the operating environmentPage Chapter About LAN FunctionsImage Projecting System via LAN LAN Functions and the FeaturesAbout LAN Functions Flow of Image TransferAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Install the software on computers Setup ProceduresNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Names and Functions of the Operation Screen Network Connection Standby DisplayNetworkModule Client Parts Names and Functions of the ScreenAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Network Environment Settings Wired LAN ConfigurationsConnecting to the LAN Line Setting ProcedureWired LAN Configurations Confirming the Operation Wired LAN Configurations Wired Factory Default See the menu above User PIN CodeFactory Default Setting of the Wired LAN DNS Domain System Blank Password User PIN CodePage Wireless LAN Configurations Setting the Network Environment Wireless LAN ConfigurationsAttaching the USB Wireless LAN Adapter Setting ProceduresWireless LAN Configurations Easy Setting Wireless Factory Default Wireless InformationComputer environment and Wireless LAN connection Wireless LAN Factory Default Settings Leap User Blank PasswordConfigurations with Browser Operation of Network ViewerIntroduction Configurations with BrowserBrowser Configuration Browser EnvironmentStarting up the Browser Screen of Wireless LAN Screen of Wired LAN InformationParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Wireless Setting PasswordMail Reaches in ***hours up to ASCII220 charactersAdmin Password Have entered is displayed as up to ASCII32 charactersUser PIN code Moderator Login Password Figure will be displayed as . The password consistsMiscellaneous Change Configuration Set Wireless LAN set menu Wired LAN set menuRestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Use the Moderator Function Moderator FunctionPreparation for Using the Moderator Function Preparation Procedure for Using the Moderator FunctionSetting the Moderator Function Registration of the ModeratorRegistration of the Clients Participants Project the Client’s Images How to Use the Moderator FunctionUnregister from Moderator Status Stop Projecting the Client’s ImagesHow to Use Network Viewer Wireless LAN Infrastructure Communication Mode How to Use Network ViewerMechanism of NetworkViewer and the Flow of the Signal Wireless LAN AdHoc Communication ModeOperation Wired LAN Communication ModeFunctional Conditions of FTP Server Which Provides Images Projecting the Image Operating with the PJ ControllerSpecify the FTP server to provide image data Operating with the Browser Refresh Wireless LAN Operating with the projectorSet timing to switch images in Auto play mode 3-240 sec Page How to Use the PJ Controller How to Use the PJ Controller How to OperateInitial Settings Mail Setting Registering E-mail AddressCheck Option items Enter the message to attach the E-mailPower & Status Turning on/off the projectorCheck the status of the projector Control InputPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Service Confirm the actual adjustmentSave the setting Set Select Set Number and name the settingLoading the Set Multi Control Select projector input Appendix Appendix TroubleshootingWireless LAN Connection cannot be established Computer cannot connect projectorsWEP Network Viewer does not work with the projector operation Cannot start up the browserProjector/PJ Controller cannot be turned on/off Speed of playing back images are very slowTerminology Setting up the IP address with arp + pingcommand Configuring WEP security with the projector Appendix KW6AC