Sanyo XG-705A owner manual Registration of the Clients Participants

8. Use the Moderator Function

Registration of the Clients (Participants)

6.Select the projector (Selected projector will be blue.) in the group from the client screen. (Moderator’s projector will be pink.) Click the Join the moderated session button.

Join the moderator

session button

7.Set session password screen will appear. Enter the password registered by a moderator (Being registered at step 4)

8.Click “OK”. The client screen will disappear and the projector icon will be displayed in the task tray of the computer. After the step, the client’s (participant’s) computer name will be put under the moderator’s control. When joining the session, the client’s computer (or the nickname) will be displayed in the moderator’s client list screen.

To quit the session, right-click the projector icon on the computer task bar and select “Exit from the moderated session” from the menu. The client screen will appear and the client has left the group.

✳Set session password screen will be displayed by clicking the Set session password button. Enter new password, then it will be a new password. If the password has changed while the session is in progress, the clients who are participating the session will not be excluded from the session.

✳The projector displayed in red on the client’s screen means it is for moderator. Operation cannot be done through the client screen.

All the preparation settings have been done for moderator function. Follow the instructions of “How to Use Moderator Function” on the next page for the operation.

61