Sanyo XG-705A owner manual Confirming the Operation

Page 28

4. Wired LAN Configurations

Confirming the Operation

Confirm that the projector has connected to the LAN properly.

1.Activate “NetworkModule Client” or “NetworkModule Moderator” which is installed into the computer connected to the LAN .

2.After appearing “NetworkModule searching” message, the name of the projector* appears on the Network Projector List, then the network setting has completed properly.

When the name of the projector does not appear and error screen appears, the network has not connected yet. Try searching again with the Refresh List button. If error screen appears again, reconfirm the LAN setting. When the projector is set where separated by the router, see next page.

When Firewall function (Anti-virus software) is effective, network projector may not be found. In that case, disable the Firewall function and try searching again.

✳If the projector is named, the name will be displayed. The name can be set with following the procedures in “6. Configurations with Browser” ➔ “Quick Setup” (pp.44–45) or “Advanced Setup” ➔ “Miscellaneous” (p.52). If the projector is not named, MAC address of the projector will be displayed.

NetworkModule Client screen

Error screen

Refresh List button Network Projector List

28

Image 28

Contents Network Set-up Operation Compliance Federal Communication Commission NoticeSafety Instructions Trademarks and CopyrightTable of Contents Advanced Setup RestartModerator Function TerminologyOperating Environment and Configuration Required Operating Environment for ComputersNetwork Specifications of the Projector Differs according to the operating environmentPage Chapter About LAN FunctionsLAN Functions and the Features About LAN FunctionsImage Projecting System via LAN Flow of Image TransferAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Install the software on computers Setup ProceduresNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Names and Functions of the Operation Screen Network Connection Standby DisplayNetworkModule Client Parts Names and Functions of the ScreenAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Wired LAN Configurations Connecting to the LAN LineNetwork Environment Settings Setting ProcedureWired LAN Configurations Confirming the Operation Wired LAN Configurations Wired Factory Default See the menu above User PIN CodeFactory Default Setting of the Wired LAN DNS Domain System Blank Password User PIN CodePage Wireless LAN Configurations Wireless LAN Configurations Attaching the USB Wireless LAN AdapterSetting the Network Environment Setting ProceduresWireless LAN Configurations Easy Setting Wireless Factory Default Wireless InformationComputer environment and Wireless LAN connection Wireless LAN Factory Default Settings Leap User Blank PasswordConfigurations with Browser Operation of Network ViewerConfigurations with Browser Browser ConfigurationIntroduction Browser EnvironmentStarting up the Browser Screen of Wireless LAN Screen of Wired LAN InformationParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Wireless Setting PasswordMail Reaches in ***hours up to ASCII220 charactersAdmin Password Have entered is displayed as up to ASCII32 charactersUser PIN code Moderator Login Password Figure will be displayed as . The password consistsMiscellaneous Change Configuration Set Wireless LAN set menu Wired LAN set menuRestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Use the Moderator Function Moderator FunctionPreparation for Using the Moderator Function Preparation Procedure for Using the Moderator FunctionSetting the Moderator Function Registration of the ModeratorRegistration of the Clients Participants How to Use the Moderator Function Unregister from Moderator StatusProject the Client’s Images Stop Projecting the Client’s ImagesHow to Use Network Viewer How to Use Network Viewer Mechanism of NetworkViewer and the Flow of the SignalWireless LAN Infrastructure Communication Mode Wireless LAN AdHoc Communication ModeOperation Wired LAN Communication ModeFunctional Conditions of FTP Server Which Provides Images Projecting the Image Operating with the PJ ControllerSpecify the FTP server to provide image data Operating with the Browser Refresh Wireless LAN Operating with the projectorSet timing to switch images in Auto play mode 3-240 sec Page How to Use the PJ Controller How to Use the PJ Controller How to OperateInitial Settings Mail Setting Registering E-mail AddressCheck Option items Enter the message to attach the E-mailPower & Status Turning on/off the projectorCheck the status of the projector Control InputPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Service Confirm the actual adjustmentSave the setting Set Select Set Number and name the settingLoading the Set Multi Control Select projector input Appendix Troubleshooting Wireless LAN Connection cannot be establishedAppendix Computer cannot connect projectorsWEP Cannot start up the browser Projector/PJ Controller cannot be turned on/offNetwork Viewer does not work with the projector operation Speed of playing back images are very slowTerminology Setting up the IP address with arp + pingcommand Configuring WEP security with the projector Appendix KW6AC