Sanyo XG-705A owner manual Image Adjustment

10. How to Use the PJ Controller

Image Adjustment

On this screen, you can adjust the image projected from the projector. Select an Image Adjustment Mode from the pull- down menu and click Set button. The items displayed on this screen is automatically changed according to the input signal. Click 7 8 buttons to adjust the value. Every time you change the value, click Set button. if you click Reset button, all the adjusted values will be reset.

✳ Some items may not be adjusted depending on the functions of your projector or input signal. In this case, “----” will be shown in the field of

the item.

Parameter	Description
Image Adjustment Mode	....Select from “Dynamic”, “Standard”, “Real*”, “Cinema**”, “Black Board”, “Image
	1– 4”, from the pull-down list.
	Image 1–4 can be set by users.
Original Mode	Displays the original mode.
Contrast	Click 78 to adjust the image contrast.
Brightness	Click 78 to adjust the image brightness.
Tint	Click 78 to obtain a proper image.***
Color	Click 78 to adjust the color intensity.
White Balance
Color Temp	Click 78 to adjust the color temp level (XLow, Low, Mid, or High).
Red, Green, Blue	Click 78 to adjust white balance of the image.
Gamma	Click 78 to obtain a better balance of contrast.
Sharpness	Click 78 to adjust the image sharpness.
Noise Reduction**	Set the Noise Reduction function.
Progressive**	Switch progressive mode: “Off”, “L1” (motion picture), “L2” (still picture), Film
Comment	You can save a note regarding Image Adjustment. Click “Save” to save the note.
Store	You can save the settings of the Image Adjustment. Select the mode number
	you wish to save and click Set button. If you click “Reset”, all the adjusted
	values will be reset.

*Items only for computer input.

**Items only for video input.

***If the color system is PAL, SECAM, PAL-M, or PAL-N, tint cannot be adjusted.

83