Sanyo XG-705A owner manual Mail Setting, Registering E-mail Address

10. How to Use the PJ Controller

E-mail Setting

The projector has a function to send an e-mail to inform its operating condition to the administrator or users. Select E-mail Setting from the main menu and configure each item as follows:

1. Registering E-mail Address

Parameter	Description
SMTP Server	Enter the address of SMTP server and click “Set”.
Administrator Address	Enter the E-mail address of administrator and click “Set”.
Mail Address	Enter E-mail addresses of users and click “Set”.
	To delete the E-mail address, click “Delete”.
Option	When the checked item has occurred, the projector sends alert
	messages.

✳The SMTP server is a server for sending E-mail. Please contact your network administrator to have this SMTP server address.

✳To use the E-mail function, the DNS address must be set correctly. (Refer to “6. Configurations with Browser” ➔ “Advanced Setup”➔ “TCP/IP” (p.46).)

You cannot use this E-mail function if the SMTP server is not available in your network environment. If the SMTP server is located in your LAN (Local Area Network), the address set to SMTP server should be specified the in SMTP server located in your LAN. The server located outside of your LAN may not be available for security reason. For further information, please contact your network administrator.

76